Samsung Flip Printing Software Setupexe Verified May 2026

The Samsung Flip Printing Software, typically installed via Samsung Flip Printing Software Setup.exe

, enables direct printing from Samsung Flip displays by utilizing a PC as a print server on the same network. Proper setup requires disabling PC power-saving modes, ensuring accurate system time, and supporting only A4 physical printers. For the full installation manual, see the Electis PDF אלקטיס Samsung Flip Printing Software

The Samsung Flip (now officially under the Samsung Interactive Display brand) requires specific software to enable seamless printing and PC connectivity. Whether you are using a Flip Pro (WM75B/85B) or an older model, the setup process ensures your interactive whiteboard can talk to your network printers. 🛠️ Essential Software Components

To get the most out of your Samsung Flip, you typically need two primary pieces of software:

Samsung Flip Printing Software: Converts Flip files into a printable format.

Flip Connect: Allows wireless screen sharing and touch control from a PC.

Net-i Viewer: (Optional) For managing multiple displays over a network. 📥 How to Find the Verified Setup.exe

Samsung has transitioned its support pages. To ensure you are downloading a verified, malware-free file, follow these steps:

Visit the Official Portal: Go to the Samsung Display Solutions website.

Search by Model: Enter your model code (e.g., WM55H or WM65R). Navigate to Support: Click the Resources or Support tab.

Download Drivers: Look for the "Printing Software" zip file.

Verify Digital Signature: Right-click the downloaded .exe > Properties > Digital Signatures. It should list Samsung Electronics Co., Ltd. 🚀 Installation and Setup Guide 1. Server-Side Installation (The PC)

The "Printing Software" actually acts as a print server. Install it on a PC that remains on the same network as the Flip. Run the Setup.exe as an Administrator. The software will create a virtual port. samsung flip printing software setupexe verified

Firewall Note: Ensure TCP Port 12500 is open to allow the Flip to find the PC. 2. Printer Selection Open the Samsung Flip Printing Software on your PC. Select the Default Printer you want the Flip to use.

The software must stay running in the system tray for printing to work. 3. Flip Display Configuration On the Flip screen, go to Settings > Connect > Printer.

Enter the IP Address of the PC where you installed the software. Tap Connect. ⚠️ Troubleshooting Common Issues

"Printer Not Found": Ensure the PC and Flip are on the same Subnet/VLAN.

Blocked Installation: If Windows Defender blocks the .exe, verify the publisher is Samsung before clicking "Run Anyway."

Grayed Out Print Icon: This usually means the software on the PC has closed or the PC went to sleep. 🔒 Security Best Practices

Avoid Third-Party Sites: Never download setup.exe from driver-aggregation sites.

Use Ethernet: For the most stable printing, connect both the PC and Flip via LAN cables.

Update Firmware: Ensure your Flip's firmware is current via Settings > Support > Software Update.

To help you get the exact version you need, could you tell me:

What is the Model Number of your Flip? (Look for a sticker on the back)

Which Operating System is your computer running? (Windows 10, 11, or Server?) The Samsung Flip Printing Software, typically installed via

Are you printing to a local USB printer or a networked office printer?

I can provide the specific link or configuration steps for your exact setup.

Setting Up Your Samsung Flip Printing Software: Step-by-Step Guide

The Samsung Flip is an incredible tool for collaboration, but its true potential is unlocked when you can seamlessly print your brainstormed ideas directly from the board. To do this, you need to configure your PC as a print server using the Samsung Flip Printing Software Setup.exe

This guide covers everything you need to know to get your verified software running on Windows. Pre-Installation Requirements

Before you begin, ensure your PC meets these minimum specs to function as a reliable print server: Dual Core 2.5 GHz or higher (Quad Core recommended). 4 GB or more. Windows 7 (SP1) or Windows 10 (32/64-bit). Both the Samsung Flip and your PC must be connected to the same network Resources:

Your PC should have at least 50% of its CPU and RAM available for the software to function correctly. Step 1: Download the Verified Software

Always download the installation file from official sources to ensure it is verified and safe. Official Portals: Samsung Display Solutions Samsung Download Center Search Tip:

Look for "Samsung Flip Printing Software" specifically for your model (e.g., WM55H or WM55R). Step 2: Installation Process Launch the Setup: Right-click Samsung Flip Printing Software Setup.exe and select Run as administrator Language & Terms: Select your preferred language and click . Read and agree to the terms of use. Destination: Choose your installation folder or leave it as the default. SSL Port Configuration: For Flip 1.0, you must use . Flip 2.0 and newer models allow for custom SSL ports. Complete Installation: Enter your computer login password if prompted and click . The process typically takes about 5 minutes. Step 3: Connect Your Samsung Flip

Once the software is running on your PC, you must link the Flip board: On the Samsung Flip, go to right arrow right arrow right arrow Advanced Settings right arrow Print Server IP Address of the PC where you installed the software.

Ensure your physical printer is connected to that PC (via USB or network) and is set as the default printer. Pro Tips & Troubleshooting The Samsung Flip currently only supports A4 paper size for printing. No Virtual Printers:

The software does not support virtual printers (like "Print to PDF"), fax machines, or scanners. Power Settings: To also suppress reboot: SamsungFlipPrintSetup

Disable "Power Saving Mode" on your PC. If the computer sleeps, the Flip will lose its connection to the print server.

Ensure your Windows Firewall isn't blocking the SSL port you assigned during setup. IP address of your PC to complete the connection to your Flip? Samsung Flip Printing Software - DWPRO

6. Enterprise Deployment – Verified Silent Install

For IT admins managing multiple Flips, the verified setup.exe supports silent installation:

SamsungFlipPrintSetup.exe /S /v/qn

To also suppress reboot:

SamsungFlipPrintSetup.exe /S /v"REBOOT=ReallySuppress /qn"

Genuine MSI extraction (for SCCM):

setup.exe /a

This extracts SamsungFlipPrintProxy.msi and FlipPortMon.msi – both signed.

Part 4: How to Install the Samsung Flip Printing Software (Verified EXE)

Once you have the legitimate setup.exe, follow this installation guide.

Error 2: "Another installation is already in progress"

  • Fix: Restart your PC. If persists, delete C:\Users\[YourName]\AppData\Local\Temp\* and re-run the setup.exe.

1. What Exactly is the “Samsung Flip Printing Software setup.exe”?

It is not a general printer driver. Instead, it is a utility installer that enables the Samsung Flip display to communicate with printers via:

  • Samsung’s proprietary Print Proxy (installed on a Windows PC on the same network).
  • Direct IP printing (for supported PostScript/PCL printers).
  • USB print relay (when the Flip is connected to a PC via USB-C).

The setup.exe installs:

  • Flip Print Service (background Windows service)
  • Samsung Flip Printer Port Monitor
  • Optional Bonjour Print Services (for auto-discovery)

Without this software, the Flip can only export files to USB or email—not print.

A. Samsung Business Portal (Official)

  • URL: https://www.samsung.com/us/business/support/
  • Navigate to → Downloads → Find "Flip" → Select model (e.g., WM55R, LH55FPL) → Printing Software vX.X

Part 7: Common Errors and Fixes for the Verified Setup.exe

Even with a verified file, you may encounter errors. Here is how to solve them.