The string "siemens.mc.drives.acx.model.configurationData.PackageContainer" refers to a specific software package or data container used within Siemens engineering environments, such as TIA Portal or Startdrive, to handle drive configuration and simulation data.
While this exact technical identifier often appears in bill-of-materials or required software lists for high-end motion control projects, it is typically not a standalone "app" you download via a single link. Instead, it is part of larger software installations or specific hardware support packages. Where to Find the Package
TIA Portal / Startdrive: This container is generally bundled with SINAMICS Startdrive (Basic or Advanced). If your project requires it, ensure you have the latest version of Startdrive installed.
DriveSim Designer/Engineer: If you are working with digital twins or Functional Mockup Units (FMUs), this data package is often integrated into DriveSim Designer or DriveSim Engineer.
CAx Download Manager: For specific CAD/CAE product data (including 3D models and configuration packages), use the Siemens CAx Download Manager on the SiePortal. You will need the specific Article Number (MLFB) of your drive to generate the download request.
Hardware Support Packages (HSP): In some cases, the configuration data for newer drives must be added via a Hardware Support Package. Check the TIA Portal HSP list to see if your specific drive model requires a separate update. Verification & Support
If you have a specific article number for your Siemens drive, you can enter it directly into the Siemens Industry Online Support (SIOS) search bar to find all associated software, manuals, and configuration files.
DriveSim Engineer - ID: 109821163 - Industry Support Siemens
To recap, there is no single permanent siemensmcdrivesacxmodelconfiguration datapackage container download link. Instead, use this two-step method:
support.industry.siemens.com/cs/document/Once you authenticate with a free Siemens account, the download will start automatically. Always verify the file checksum against the official SHA-256 hash listed on the download page.
By following this guide, you will never waste engineering hours hunting for the correct ACX DataPackage. Your Sinamics S120 drives will be configured correctly, safely, and in full compliance with Siemens’ digital workflow.
Last updated: October 2025. Always check Siemens Industry Online Support for the latest firmware generation (e.g., S120 FW 6.x).
The Siemens MC Drives ACX model configuration data package container is a critical resource for automation professionals working with the Siemens SINAMICS ACX series of variable frequency drives (VFDs). These data packages provide the essential parameters, firmware definitions, and hardware identifiers—such as the SINAMICS-ACX-6SL—required for seamless integration into the TIA Portal or Startdrive environments. Understanding the ACX Data Package Container
A "container" in this context refers to a unified file or archive that bundles all necessary metadata for a specific drive model.
Device Identification: Contains unique deviceId and hardwareId tags used by engineering software to recognize the physical drive. The string "siemens
Parameter Groups: Organizes drive settings into logical sets like control, communication, and processDataEntries (e.g., StatusWord or ControlWord).
Firmware Compatibility: Ensures the configuration matches specific firmware versions, such as v3.12.0, preventing mismatch errors during commissioning. How to Access the Download Link
Official download links for Siemens drive configuration packages are strictly managed through the Siemens Industry Online Support (SIOS) portal, now often referred to as SiePortal.
Direct Search: Navigate to the Siemens SiePortal Product Support and search for the specific model number (e.g., 6SL...) associated with your ACX drive.
CAx Online Configurator: For bulk data packages, including 2D/3D models and configuration files, use the Siemens CAx Online Manager. This tool allows you to build a custom "container" of data for multiple components simultaneously.
Startdrive Integration: If you are using TIA Portal, many ACX model configurations are included in Hardware Support Packages (HSP). Checking for updates within the TIA Portal software is often the fastest way to "download" the latest container. Key Technical Specifications in the Package
When you download and import a configuration container, it typically includes: Siemens SiePortal
Siemens SiePortal. ... Please enable JavaScript to continue using this application. Siemens SiePortal Search - Siemens SiePortal - Support
A very specific topic!
Here's a feature on the topic:
Feature: Simplified Configuration and Download of Siemens ACX Model Drives with Data Package Container
Description: The Siemens ACX model drives configuration data package container provides a convenient and efficient way to download and configure drive systems. This feature enables users to easily access and manage the configuration data for their ACX model drives, streamlining the setup and commissioning process.
Key Benefits:
Technical Details:
Supported Drives:
Software Requirements:
Download Link:
By utilizing the Siemens ACX model drives configuration data package container, users can simplify the configuration and download process, reducing errors and commissioning time, and improving overall drive system performance.
Unzip the archive. You will find:
SINAMICS_SACX_VX_X.mcfx (Main configuration file)GSDML-V2.4X-Siemens-SINAMICS-SACX-XXXXXXXX.xmlFirmware/ folder (if included)| Error Message | Likely Cause | Solution |
|---------------|--------------|----------|
| “SACX model configuration not found” | Wrong container for your CU firmware | Download version that matches your CU firmware (e.g., V5.2 container for FW 5.2) |
| “Invalid data package container hash” | Corrupted download | Re-download from Siemens SIOS; check MD5 checksum |
| “TIA Portal cannot open McDrive container” | Outdated TIA version | Upgrade to TIA V17+ for SACX V5.x containers |
| “Missing motor data library” | Incomplete package | Ensure you extracted the entire MotorData/ subfolder |
Once you have downloaded the DataPackage Container, follow these steps to integrate it:
.zip file, extract the contents to a local folder on your engineering station.While there isn't a single "story" or direct public link for a file with that exact name in the general search results, this terminology points toward Siemens Motion Control (MC) systems and ACX (Advanced Controller eXtension) configurations, likely used within the Siemens Support Center or SiePortal.
The following resources are the most likely locations for such a configuration or data package:
Siemens Support Center (Global): This is the primary repository for software kits, patches, and configurations. You can typically find software like Teamcenter or specialized drive configuration files by logging into the Siemens Support Center.
SiePortal (Industry Support): For hardware-specific data packages (like CAx data for drives), the Siemens SiePortal allows you to search for specific product IDs and download technical configuration data.
Active Workspace / Teamcenter: If this configuration is part of a PLM (Product Lifecycle Management) workflow, it may be hosted within a Teamcenter Installation where model configurations are managed as part of a software kit.
Motion Control Documentation: Siemens provides extensive documentation on cyber security and technical releases for their data collectors and vision systems at Siemens Cybersecurity.
Clarification:This query could also be interpreted as a request for SwiftData development assistance, as ModelConfiguration and ModelContainer are core classes in Apple's SwiftData framework used for app database management. However, given the "Siemens MC Drives" prefix, it is almost certainly a technical engineering file. If you haven't already, register on the Siemens website
Finding the specific Siemens MC Drives ACX Model Configuration Data Package Container is a common requirement for engineers working with SIMOTION or Startdrive environments in TIA Portal.
Below is a blog-style guide to help you locate the official download and understand what this package does. What is the ACX Model Configuration Data Package?
This package is a component of Siemens' drive engineering software, specifically linked to SINAMICS Startdrive. It contains the necessary "container" data that allows TIA Portal or SIMOTION Scout to recognize and configure specific drive models (like SINAMICS S120, G120, etc.) within a project.
If you are seeing an error about "Missing software packages" for Siemens.mc.drives.acx.model.configurationData.PackageContainer, it typically means the drive model used in the project isn't installed in your current software version. Where to Download the Official Link
Siemens hosts all official engineering software on the Siemens SiePortal (formerly Industry Online Support).
Search by Version: Rather than searching for the "ACX" string directly, search for the latest Startdrive version (e.g., "Startdrive V19 download").
Hardware Support Packages (HSP): If your software is up to date but still missing a specific model, you may need a Support Package (HSP). You can find the comprehensive HSP list for TIA Portal here.
Third-Party Mirrors: While some users share files via Google Drive links for older versions, it is highly recommended to use the Official Siemens Support Site to ensure file integrity and security. How to Install the Package Once you have the correct file: Open TIA Portal. Go to Options > Support Packages.
Select "Add from file system" and point to the .isp or container file you downloaded.
Click Install (Note: You must close all TIA Portal instances for the installation to finish). Troubleshooting "Missing Package" Errors If the error persists after installing Startdrive:
Version Mismatch: Ensure your Startdrive version matches your TIA Portal version (e.g., TIA V18 requires Startdrive V18).
Incomplete Installation: Sometimes the "Optional" drive models are unchecked during the initial setup. Re-run the Startdrive installer and ensure all model types are selected.
Consult the Forum: For specific version issues, check the Siemens Forum threads where experts often post direct links to specific service packs. Required Software - Siemens SiePortal
Motion Control System SIMOTION. Required Software. in Motion Control System SIMOTION. T. tmdawc. Experienced Member. 3. 25.6k. 28/ Siemens SiePortal Required Software - Siemens SiePortal given the "Siemens MC Drives" prefix