This is the story of "Verified" – not just a status, but a legendary security layout passed down by the most efficient airport managers in the world.
Once, there was a small airport plagued by "Requires Secure Area" warnings and angry passengers missing their flights. The manager, desperate for order, realized that a Verified Layout isn't just about placing items; it’s about the flow of human movement. Here is how the legendary layout was built:
The Golden Ratio: To keep the line moving, the manager followed the 2:1:3 rule—two ID Check Stands leading to one Bag Scanner, which fed into three Body Scanners. This balanced the slow body scanners with the lightning-fast ID checks.
The Three Pillars: The zone was only "verified" once it contained the three essential tools: an ID Check Stand, a Bag Scanner (staffed or remote), and a Metal Detector or Body Scanner.
Logical Lane Mapping: Instead of letting passengers wander, the manager used the Advanced Security research to assign specific ID stands to specific scanners. This turned a chaotic mob into a series of disciplined "lanes."
The "Shallow but Wide" Strategy: Rather than a long, narrow hallway that caused bottlenecks, the security area was built wide to accommodate many lanes at once, allowing thousands of passengers to pass through without a single delay.
The Arrival Split: To avoid a final "Invalid" status, the manager ensured that arriving passengers never crossed back into the security zone. They were funneled through One-Way Exit Gates directly to the non-secure baggage claim.
An efficient security layout in SimAirport is critical for preventing flight delays and maintaining passenger satisfaction
. To create a verified, high-throughput system, you must balance equipment ratios and organize them into clear, assigned "lanes" rather than letting passengers wander between machines. Steam Community 1. Optimal Equipment Ratios
Different machines process passengers at different speeds. Use these verified ratios to prevent bottlenecks at the slowest points: Standard Setup (Metal Detectors): 1:2:2 ratio (1 ID Check Stand, 2 Bag Scanners, 2 Metal Detectors). Advanced Setup (Body Scanners): 1:2:3 ratio simairport security layout verified
(1 ID Check Stand, 2 Bag Scanners, 3 Body Scanners) because body scanners are significantly slower than metal detectors. Remote Scanners: If using Remote Bag Scanners, do not assign more than 4–5 scanners per monitoring desk to avoid efficiency declines. Steam Community 2. The "Lane" Configuration
For maximum efficiency, you must manually assign machines to one another to create a forced path: Steam Community Assign Queue to ID Stand: Create a queue and use the tool to link it to your ID Check Stands. Assign ID Stand to Bag Scanner: This ensures passengers move directly to the next step. Assign Bag Scanner to Body Scanner/Metal Detector: This completes the verified lane. Dedicated Lanes: Create a small, separate lane for Flight Crew
to ensure they never get stuck behind a massive queue of passengers. Steam Community 3. Layout Best Practices Building ADVANCED SECURITY — SimAirport (#4)
Verified Security Layout Report: SimAirport Optimization This report outlines the "verified" best practices for designing and maintaining an efficient security zone in SimAirport
. Security is the most volatile part of the airport ecosystem; a poor layout creates "clots" that cause passenger dissatisfaction and flight delays. 1. Mandatory Zone Requirements To function, a security zone must be semi-enclosed
. A working security area requires three core components, all of which must be staffed by security personnel: ID Check Stand : Validates passenger travel documents. Bag Scanner : Standard or remote versions for carry-on luggage. Pax Scan Device : Either a Metal Detector or a Body Scanner. : Secure areas must be isolated from public zones by a
that runs to the map edges. Any break in this boundary will stop airport operations. 2. Verified Throughput Ratios
Efficiency is achieved by balancing the different processing speeds of security equipment. Verified "lane" ratios from experienced operators include: Configuration Ratio (ID : Bag : Pax) Metal Detector Setup Metal detectors are faster than body scanners. Body Scanner Setup Use more body scanners as they are the slowest link. Scaling (Medium/Large)
Add a dedicated ID stand to ensure bag scanners never sit idle. 3. Spatial Layout & Advanced Routing Security check at the airport: our tips - travelite This is the story of "Verified" – not
Train staff and passengers on typical airport security flow and design elements using a simulated layout.
| Throughput (Pax/Hour) | X-ray Units | Metal Detectors | Staff per shift | |----------------------|-------------|----------------|------------------| | < 400 | 2 | 2 | 4 (2 per station) | | 400–800 | 4 | 4 | 6–8 | | > 800 | 6+ | 6+ | 12+ (plus roving) |
A verified layout requires doors. If you use fence gates without a staff door, your Security Guards cannot reach the flagged passenger at the metal detector to resolve the alarm. The passenger stands there forever. The queue stops. The airport burns (figuratively).
Fix: Place a "Security Staff Door" adjacent to the metal detectors. Your guards will path through it to handle alarms without walking through the incoming queue.
In the world of airport simulation, the "Security Layout Verified" message is the game’s way of telling the player that their engineering meets the standards of modern aviation safety. It is a testament to a design that respects the laws of the virtual world: keep the bad elements out, let the good elements flow, and ensure the architecture supports the bustling life of the terminal.
For maximum efficiency in SimAirport, the community recommends a security layout featuring a "shallow but wide" design with a ratio of two ID check stands per one bag scanner, utilizing two metal detectors for standard lanes. Advanced security research and staggered flight scheduling are crucial for preventing bottlenecks and managing passenger flow, especially when using slower body scanners. Read the full discussion on the SimAirport Steam Community. Ideal Security Layout :: SimAirport Algemene discussies
To create a verified security layout in SimAirport, you must balance throughput speed with space efficiency to avoid passenger "blobs" and missed flights. The "Golden Ratio" of Security
A deep review of community-verified layouts suggests that security should be built "shallow but wide". This means spreading your layout across a large horizontal area to accommodate multiple parallel lanes rather than long, winding queues. The recommended equipment ratio to maintain fluid flow is: 1 ID Check Stand 1 Bag Scanner 1 Metal Detector (or Body Scanner) Strategic Layout Components
Lane Assignment: In advanced setups, manually assign each lane to specific queues to prevent the AI from failing and ending up in loops. The Staff Door Oversight A verified layout requires doors
The "U-Shape" Concept: One highly effective verified layout involves creating a large "U" of security zones wrapped around a central ticketing hub. This has been shown to support up to 10 XL gates efficiently using approximately 60 lanes.
Equipment Sequencing: While players often place the ID stand first, ensure you leave enough space between the bag scanner and metal detector for "helper arrows" to guide orientation, which prevents pathfinding errors. Operational Deep Review Recommendation Throughput
Body scanners are realistically safer but simulate slower than metal detectors in-game.
Use Metal Detectors for high-volume economy gates; save Body Scanners for specialized "Premium" lanes. Staffing Security lanes require constant monitoring.
Research Advanced Security to unlock the full "Assign To" functionality for ID stands. Maintenance Bag scanners can break down and require toolboxes to fix.
Place a Maintenance Room near the security zone to minimize downtime during scanner failures. Flow Fixes
AI often fails if the bag scanner is placed after the metal detector.
Always place the ID Stand → Bag Scanner → Metal Detector in a straight line. Common Layout Pitfalls
The "Wasp-Waist": Avoid bottlenecking all passengers into a single narrow entry point before the ID stands.
Wasted Space: Many layouts end up as "boxes" with empty voids. Use planning tools to find the center of your map and divide security into four equal, manageable quadrants.
The "Save Bug": Be aware that scripts can sometimes fail upon loading a saved game, causing sudden "blobs" at scanners even in verified layouts. Recalculating lanes or restarting the game often fixes this. Building ADVANCED SECURITY — SimAirport (#4)