Sp - Flash Tool Stuck On Download _hot_ Da 100

This is a very common issue when flashing MediaTek (MTK) devices. It usually means the SP Flash Tool is waiting for a response from the phone’s preloader, but the connection is being blocked, interrupted, or misunderstood by the computer.

Here is a step-by-step troubleshooting guide to fix "Stuck on Download DA 100%".

Solution 6: Reinstall SP Flash Tool and Drivers

  1. Uninstall SP Flash Tool: If none of the above solutions work, uninstall the SP Flash Tool and any related drivers.
  2. Reinstall: Reinstall the SP Flash Tool and necessary drivers.

Conclusion

The SP Flash Tool stuck on "Download DA 100" issue can be frustrating, but it's usually solvable with the right approach. By systematically checking each potential cause and applying the suggested solutions, you should be able to resolve the issue and successfully flash your device's firmware. Remember to always use compatible firmware, keep your drivers updated, and ensure a stable connection during the flashing process. If you continue to experience issues, consider seeking help from online forums or professional technicians who specialize in Android device repairs.

FAQs

Q: What does "Download DA 100" mean in the SP Flash Tool? A: "Download DA 100" is a stage in the SP Flash Tool process where it attempts to connect to the device and prepare it for firmware flashing. Getting stuck here usually indicates a communication issue between the tool and the device.

Q: Can a faulty battery cause the SP Flash Tool to get stuck? A: Yes, a low battery or a faulty battery can interrupt the flashing process. Ensure your device is sufficiently charged before attempting to flash.

Q: How do I know if my firmware is compatible with my device? A: Check your device's model number and compare it with the firmware details. Ensure the firmware is specifically designed for your device model and version.

Getting stuck at "Download DA 100%" in SP Flash Tool is a common bottleneck that indicates the software has successfully sent the Download Agent (DA) to your device's internal RAM but is now failing to establish a handshake to proceed with the actual firmware flashing. Understanding the "Download DA 100%" Hang

The Download Agent is the critical intermediary software that allows your PC to communicate with the MediaTek (MTK) chipset. When it reaches 100% and halts, it usually means the device has "accepted" the agent but cannot initialize the next phase—often due to driver conflicts, security boot protocols, or hardware connection drops. Proven Solutions to Resolve the Freeze 1. Update or Reinstall VCOM Drivers

The most frequent cause is an unstable or incorrect MediaTek Preloader VCOM driver.

Clean Slate: Use a tool like USBDeview to uninstall all existing MTK and VCOM drivers.

Manual Install: Restart your PC and manually install the VCOM drivers through the Device Manager via "Add Legacy Hardware". 2. Swap the Download Agent (DA) File

Modern MTK devices, especially those with Secure Boot, often require a specific DA file rather than the default MTK_AllInOne_DA.bin. Navigate to the Download-Agent field in SP Flash Tool.

Select a DA file specifically provided with your phone’s stock firmware or try a Secure Boot DA. 3. Adjust Connection Settings and Physical Hardware

The tool may be timing out because it loses contact with the device immediately after the DA is loaded.

USB Speed: Go to Options > Option > Connection and set the USB Speed to Full Speed instead of High Speed.

Physical Connection: Try a different USB cable (preferably the original) and a USB 2.0 port on your PC; USB 3.0 ports often cause communication drops with flashing tools.

Battery State: Ensure the battery is at least 50% charged and firmly inserted. Some devices require holding a volume button (usually Volume Down or both) while connecting to stay in the correct mode.

List of sp flash tool error codes, meanings & how to fix (solution)

Getting stuck at "Download DA 100%" in SP Flash Tool is a frequent frustration for MediaTek device users.

This state typically indicates the tool has successfully loaded the Download Agent (DA)

into the device's RAM, but is failing to initiate the actual flashing process User Experience: Stuck at Download DA 100%

This issue often presents as a red or yellow progress bar that completes but never transitions to the flashing stage (the purple or yellow "Download" bar). Users commonly experience this when there is a communication breakdown between the PC and the phone's bootloader. Common Causes & Troubleshooting Based on technical community consensus from platforms like XDA-Developers , here is how to resolve this specific hang: Secure Boot Requirements

: Many modern MediaTek devices require a custom DA file instead of the default MTK_AllInOne_DA.bin

. If your device has secure boot, you must manually select the specific DA file provided with your firmware. Driver Instability MediaTek VCOM drivers

may be improperly installed or conflicting with other USB drivers. to clear old drivers and reinstall the latest VCOM drivers. Connection Method : The tool waits for a specific handshake.

: Try different button combinations while connecting the USB cable: Volume Down , or both. Alternative

: Ensure the phone is completely powered off. If the battery is removable, try taking it out and reinserting it before connecting. Hardware Conflicts

: Sometimes the issue is as simple as a faulty cable or port. : Switch to a USB 2.0 port

(usually black) instead of USB 3.0 (blue), as the latter often causes timing issues with SP Flash Tool. Version Mismatch

: Using an outdated version of the tool can lead to generic hangs or Error 2004 : Download the latest version of SP Flash Tool and run it as an Administrator Windows XP Compatibility Mode Summary Verdict

The "Download DA 100%" hang is rarely a sign of a "bricked" device, but rather a configuration error. Success usually comes down to finding the correct DA file for your specific model and ensuring your VCOM drivers

are active in Device Manager the moment the phone is plugged in. or a newer SP Flash Tool version for your device model? SP Flash Tool Error Solutions Guide | PDF - Scribd

SP Flash Tool hanging at "Download DA 100%" indicates a failure to establish a handshake after successfully loading the Download Agent, usually caused by driver conflicts, hardware issues, or Secure Boot restrictions. Key solutions include reinstalling MediaTek VCOM drivers, using a device-specific custom DA file, switching to USB 2.0 ports, and verifying the phone is powered off during connection. For more detailed solutions, visit Hovatek.

List of sp flash tool error codes, meanings & how to fix (solution)

If your SP Flash Tool is stuck on "Download DA 100%", you are not alone. This is one of the most common errors when flashing MediaTek (MTK) devices.

It means the computer has successfully sent the Download Agent (DA) to the phone, but the device is failing to communicate back to start the actual flashing process. sp flash tool stuck on download da 100

Below is a complete, step-by-step guide to troubleshoot and fix this issue. ⚡ Quick Fixes to Try First

Before diving into complex settings, try these basic hardware checks:

Change the USB Cable: Use a high-quality data cable, preferably the original one.

Change the USB Port: Avoid USB 3.0 (blue ports). Plug into a USB 2.0 port directly on the motherboard (rear of desktop PCs).

Disconnect and Reconnect: Unplug the phone, remove the battery (if removable) for 10 seconds, put it back, and try again.

Check Button Combinations: Some MTK phones require holding Volume Down, Volume Up, or Both while plugging in the USB cable to trigger the correct download mode. 🛠️ Method 1: Install Correct MediaTek VCOM Drivers

A corrupted or missing VCOM driver is the #1 cause of the "Download DA 100%" hang. The tool recognizes the device initially but loses the connection when switching modes. Download the latest MTK VCOM USB Drivers.

On Windows 10 or 11, you must Disable Driver Signature Enforcement before installing, or the drivers will not work. Open Device Manager on your PC.

Connect your turned-off phone. Look for MediaTek PreLoader USB VCOM or MTK USB Port.

If you see a yellow triangle, right-click and update the driver manually. 📂 Method 2: Use the Correct DA and Scatter Files

Using a generic Download Agent (DA) on a secure boot device will cause the tool to freeze at 100%.

Match the DA file: In SP Flash Tool, click the Choose button next to "Download-Agent".

Try selecting the default MTK_AllInOne_DA.bin found inside the SP Flash Tool folder.

If your device has a secured bootloader (like many Xiaomi, Oppo, or Realme MTK phones), you must use a specific custom DA file matching your phone model.

Ensure your Scatter file matches your exact phone model and stock ROM version. 🔓 Method 3: Bypass MTK Auth (For Modern Devices)

Newer MediaTek devices have a secure boot system that requires server authentication. SP Flash Tool will hang at 100% DA because it cannot bypass this security.

Download an MTK Auth Bypass Tool (such as MTK Meta Utility or MCT Bypass).

Install the required LibUSB 32 filters as prompted by those tools. Open the bypass tool and click Disable Auth.

Connect your phone while holding the boot keys (usually Volume Up + Volume Down).

Once the tool says "Protection Disabled", immediately open SP Flash Tool and click Download. ⚙️ Method 4: Change Connection Settings

Sometimes the tool times out because the connection speed or port is not configured correctly.

In SP Flash Tool, go to Options > Option (or press Ctrl + O). Navigate to the Connection tab on the left. Change the USB Speed from "High Speed" to Full Speed.

Set the Battery option to "Without Battery" if your device has a non-removable battery (or try "Auto Detect"). 🛑 Method 5: Run as Administrator & Use Older Versions

Compatibility issues with newer Windows versions can cause the software to hang. Right-click flash_tool.exe and select Run as Administrator.

If you are using the latest version of SP Flash Tool (v6.x), try downgrading to a stable v5.x version (like v5.1924), as many older scatter files only work correctly on version 5.

To help you get the exact files or steps needed to unbrick your device, could you share: What is the exact brand and model of your phone?

What operation are you trying to do? (e.g., flashing full stock ROM, rooting, or unlocking bootloader) Which Windows version is your computer running?

Smart Phone Flash Tool (SP Flash Tool) becomes stuck at "Download DA 100%," it signifies a critical communication breakdown between the computer and the MediaTek (MTK) device. While the progress bar indicates that the Download Agent (DA) has been successfully sent to the device's internal memory, the software is unable to proceed to the next phase—usually the flashing of actual firmware partitions like the preloader or system. Resolving this issue requires a systematic approach to identifying whether the bottleneck is hardware, driver, or software-related. Root Causes of the "DA 100%" Stall

The primary reason for this stall is that the flash tool is waiting for a response from the device that never arrives. This can be caused by: Driver Conflicts : Improperly installed or outdated VCOM drivers

prevent the tool from maintaining a stable connection once the initial handshake (the DA stage) is complete. Secure Boot Requirements

: Newer devices often require a specific "Secure Boot" Download Agent or an authentication file (auth file) to authorize the flashing process. Physical Connectivity

: A faulty USB cable, a damaged port, or insufficient power from a USB hub can cause the communication to drop immediately after the DA is sent. Hardware Mismatch

: A mismatch between the firmware's scatter file and the physical hardware of the phone can cause the tool to hang as it fails to verify the target device's internal layout. Strategic Solutions

To overcome this error, users should apply the following troubleshooting steps in order of complexity: Check Hardware Connections

Switch to a high-quality original USB cable and connect directly to a rear USB port on the PC motherboard rather than a front-panel port or hub.

Ensure the device is powered off completely. If the battery is removable, take it out and reinsert it before reconnecting. Verify and Update Drivers Reinstall the MediaTek USB VCOM drivers

and check the Windows Device Manager to ensure the device is recognized as "MediaTek Preloader" or "MTK USB Port" without any warning symbols. Software Adjustments Version Compatibility : Try using a different version of the SP Flash Tool This is a very common issue when flashing

. Sometimes an older version (like v3.x) is required for legacy devices, while newer chips need v5.x or v6.x. DA File Selection : Manually select a compatible Download Agent (often MTK_AllInOne_DA.bin

) from the tool’s folder. If the device has a secured bootloader, a custom DA file specific to that model may be necessary. Device Key Combinations

Some MTK devices require specific keys to be held during connection to trigger the correct flashing mode. Common combinations include holding Volume Down , or both while plugging in the USB cable.

By methodically addressing these potential points of failure, users can typically bypass the "Download DA 100%" stall and successfully restore or update their device firmware. technical guide

for a specific phone model, or should we look for a download link for a specific version of the SP Flash Tool? Working with SP Flash Tool - GeeksforGeeks

7. Disable Conflict Software

The Persistent Hurdle: Understanding SP Flash Tool Stuck on "Download DA 100"

The SP Flash Tool is an indispensable utility for anyone working with MediaTek-powered Android devices, from smartphone repair technicians to custom ROM enthusiasts. It allows users to flash firmware, recover bricked devices, and perform low-level maintenance. However, even the most seasoned users can find themselves staring at a frustratingly static progress bar, with the tool's log displaying the ominous message: "Download DA 100." This seemingly simple error—where the tool fails to progress beyond sending the Download Agent (DA) to the device's memory—is a multifaceted issue rooted in hardware, software, and timing. Understanding its causes and solutions is essential for any technician or hobbyist seeking to restore a device to working order.

At its core, the "Download DA 100" error indicates a communication breakdown between the SP Flash Tool running on a PC and the MediaTek device in Preloader or BROM mode. The Download Agent is a small piece of code that the tool uploads to the device's internal RAM to manage the actual flashing process. When the tool gets stuck at 100% of the DA download phase, it means the PC has successfully transmitted the DA, but the device has not acknowledged its receipt or executed it properly. This handshake failure can stem from several interrelated factors, the most common being driver conflicts, incorrect timing of the connection sequence, or hardware-level issues such as faulty USB cables or unstable power delivery.

Software and driver issues are among the most frequent culprits. Windows, in particular, often automatically installs generic or outdated USB drivers that conflict with MediaTek’s proprietary VCOM (Virtual COM port) drivers. Without the correct, signed drivers, the PC and device cannot maintain the low-level, interrupt-driven communication required for the DA to initialize. Furthermore, the SP Flash Tool version itself must be compatible with both the device’s CPU (e.g., Helio G-series, Dimensity) and the specific firmware format. Using an older tool version on a newer chipset can cause the DA upload to hang, as the tool may send an incompatible agent. Similarly, the widely recommended "Download Only" versus "Firmware Upgrade" mode selection can affect how the DA behaves; choosing the wrong option for the device’s current state often triggers a freeze at 100%.

Beyond software, the physical connection and user procedure are equally critical. The infamous "timing issue" with MediaTek devices requires the user to click "Download" in the SP Flash Tool before connecting the powered-off device to the USB port. If the device is connected too early, Windows may enumerate it as a generic device, interfering with the Preloader mode. Conversely, if connected too late, the Preloader window of opportunity (usually 1–2 seconds after battery insertion or USB connection) may close. Hardware flaws such as a loose USB port, a cable that does not support data transfer (charge-only cables), or an unstable power supply from a USB hub can introduce bit errors during DA transmission, causing the checksum to fail and the device to stall without an error message. Even the device’s battery level matters: a deeply discharged battery may prevent the Preloader from loading into RAM properly, leading to a hang at DA 100.

Resolving this issue demands a systematic approach. The first step is always to ensure the correct drivers are installed, often by using the "LibUSB" filter driver via Zadig or installing the official MediaTek USB VCOM drivers. Next, one should test different USB ports (preferably USB 2.0), a high-quality data cable, and bypass any USB hubs. Changing the SP Flash Tool’s options—such as switching to "USB Checksum" off or toggling "DA DLL Load" settings—can also help. For persistent cases, using an older or alternative version of the SP Flash Tool (e.g., v5.1924 instead of the latest build) or performing the flash on a different PC (or a virtual machine with a clean Windows installation) may overcome the obstacle. Ultimately, when none of these software measures work, the issue may point to a hardware fault on the device’s motherboard, such as damaged eMMC memory or a faulty PMIC, which requires professional reballing or replacement.

In conclusion, the SP Flash Tool being stuck on "Download DA 100" is not a dead end but a diagnostic signpost. It signals a failure in the delicate chain of driver compatibility, connection timing, and hardware integrity. While frustrating, the error forces technicians to methodically verify each link—from the USB cable to the firmware version. By understanding that this 100% stall represents a handshake failure rather than a completed operation, users can systematically eliminate variables until the device finally accepts the Download Agent and proceeds to flash. In the world of low-level Android repair, patience and methodical troubleshooting are the most valuable tools of all, turning an apparent deadlock into a solvable puzzle.

SP Flash Tool getting stuck at "Download DA 100%" is a common communication error between your PC and the MediaTek (MTK) device. This usually happens when the tool has sent the Download Agent but cannot initiate the next stage of the flashing process. 🛠️ Primary Solutions 🔌 Fix Connection & Drivers

Use a different USB port: Avoid USB 3.0 (blue) ports; use USB 2.0 instead.

Try a different cable: Use the original high-quality data cable.

Reinstall VCOM drivers: Ensure MTK USB VCOM drivers are correctly installed in Device Manager.

Remove battery: If the device has a removable battery, take it out, wait 10 seconds, and reinsert it before connecting. ⚙️ Adjust SP Flash Tool Settings

Run as Administrator: Right-click the flash_tool.exe and select Run as Administrator. Change the Download Agent: Go to the Download tab. Click the Choose button next to "Download Agent".

Select MTK_AllInOne_DA.bin (found in the SP Flash Tool folder). Check Connection Settings: Go to Options > Option... > Connection. Set "USB Speed" to Full Speed. Set "Battery" to With Battery (or "Auto Detect"). 💻 System & Security

Disable Antivirus: Temporarily turn off Windows Defender or third-party antivirus.

Disable Driver Signature Enforcement: Windows 10/11 users may need to disable this to allow VCOM drivers to function properly. ⚠️ Common Hardware Triggers

Faulty USB Port: The physical port on the phone (charging port) might be loose or damaged.

Incompatible Firmware: Ensure the Scatter file matches your exact phone model and CPU (e.g., MT6750 vs MT6755).

Locked Bootloader: Some modern MTK devices require a "Bypass Tool" (libusb/auth bypass) to allow SP Flash Tool to communicate beyond the DA stage.

To help you get past this specific percentage, could you tell me: What is the brand and model of the phone? What version of Windows are you using? Are you trying to format, upgrade, or unbrick the device?

Knowing these details will allow me to provide the specific Download Agent (.bin) or Bypass steps for your chipset.

The SP Flash Tool getting stuck at "Download DA 100%" (often shown as a red bar) usually means the tool has sent the initial boot instructions but cannot establish a stable data connection to start the actual flashing process. Common Fixes for the "Download DA 100%" Hang

If the progress bar fills to 100% and then hangs without moving to the next stage (yellow bar), try these troubleshooting steps:

Try Different Key Combinations: When connecting the USB cable, try holding different buttons. Common combinations include Volume Up, Volume Down, or both simultaneously.

Switch USB Ports and Cables: A common culprit is a faulty cable or a port that doesn't provide enough power. Use a high-quality data cable and try the USB ports on the back of your PC (if using a desktop).

Update or Reinstall VCOM Drivers: Ensure you have the correct MediaTek (MTK) VCOM drivers installed. If they are corrupted, uninstall them using a tool like USBDeview and reinstall the latest version.

Run as Administrator: Right-click flash_tool.exe, go to Properties > Compatibility, set it to Windows XP (Service Pack 3), and check Run this program as an administrator.

Use the Latest Version: Sometimes the "Download DA 100%" error is caused by a version of the tool that doesn't support your specific chipset. Download the latest version of SP Flash Tool or one specifically recommended for your device.

Check the Download Agent (DA): Ensure you are using the correct MTK_AllInOne_DA.bin file or a specific DA file provided with your device's firmware. Quick Safety Tip

Always untick the Preloader box unless you are absolutely sure you need to flash it, as flashing an incorrect preloader can permanently "brick" (disable) your device.

To fix SP Flash Tool when it is stuck at Download DA 100%, you usually need to address either driver conflicts, incorrect Download Agent (DA) files, or hardware connection issues. This specific hang point typically indicates that the tool has sent the Download Agent to the phone, but the phone's processor (BROM) has failed to initialize the handshake to start the actual flashing process. Immediate Solutions

Forced Connection Mode: While connecting the phone, try holding down the Volume Up or Volume Down button (or both) to force the device into a specific boot mode that allows the handshake to complete.

Update/Reinstall Drivers: Use a tool like USBDeview to uninstall any existing MediaTek or VCOM drivers, then perform a clean manual installation. Uninstall SP Flash Tool : If none of

Change the Download Agent: Manually select a different DA file (typically MTK_AllInOne_DA.bin) in the tool’s "Download-Agent" field. Some secure boot devices require a specific custom DA file provided by the manufacturer. Deep Technical Analysis 1. Driver and Software Configuration

Often, Windows incorrectly identifies the device or fails to switch from the "Preloader" driver to the "VCOM" driver required for data transfer.

Administrator Privileges: Always run flash_tool.exe as an administrator to ensure it has permission to open COM ports.

USB Port Selection: Avoid using USB 3.0 (blue) ports or external hubs. Use a direct USB 2.0 port on the PC's motherboard (the back ports on a desktop) for a more stable connection.

Tool Version: If you are using an older version, download the latest SP Flash Tool version. Conversely, older MTK chipsets (like MT65xx) sometimes perform better on version 3.x. 2. Hardware and Connection Audit Stuck at Download DA 100% - Hovatek

Troubleshooting SP Flash Tool Stuck on "Download DA 100%" The "Download DA 100%" error is one of the most frustrating hurdles when flashing MediaTek (MTK) devices. While it looks like the process is finished because it reached 100%, the SP Flash Tool effectively freezes, and the yellow progress bar never starts. This usually indicates a communication breakdown between your PC and the device's bootloader. Why is SP Flash Tool Stuck?

This error typically stems from a handshake failure during the initial boot phase. Common culprits include:

Driver Conflicts: Missing or incorrect MediaTek VCOM drivers.

Authentication Requirements: Newer MTK chips require a Secure Boot Auth file.

Hardware Connection: A faulty USB cable or port providing power but not data.

Version Mismatch: Using an outdated version of SP Flash Tool for a modern chipset. Step-by-Step Solutions 1. Fix the VCOM Drivers

The most frequent cause is a driver that isn't properly signed or installed.

Action: Uninstall any existing MTK drivers from your Device Manager.

Action: Download the latest MTK VCOM USB Drivers and install them manually. If you are on Windows 10 or 11, you must disable Driver Signature Enforcement before installing. 2. Use the Correct Download Agent (DA)

The "Download DA" phase is when the tool sends a small piece of code to the phone's RAM to manage the flashing process.

Solution: In the SP Flash Tool interface, look at the "Download-Agent" field. Instead of the default MTK_AllInOne_DA.bin, try selecting the specific DA file provided with your phone's firmware.

Secure Boot: If your device is newer (MT67xx series), you likely need an Authentication File (.auth). Load this into the "Authentication File" slot in the tool. 3. Bypass Auth with MTK Meta Utility

Many modern MediaTek devices have a "Bypass" requirement to allow the SP Flash Tool to communicate.

Action: Use a tool like the MTK Auth Bypass Tool or MTK Meta Utility.

Process: Run the bypass tool, click "Disable Auth," and then connect your phone while holding the Volume buttons. Once the tool says "Success," immediately hit "Download" in SP Flash Tool. 4. Check Connection Settings

Sometimes the tool is looking for the wrong connection protocol. Go to Options > Option... > Connection. Ensure "USB" is selected.

Set the Battery setting to "with battery" if your phone has a non-removable battery, or "without battery" if it's removable.

Try changing the Baud Rate to a lower speed if the connection is unstable. 5. Hardware Troubleshooting

If the software fixes fail, the physical link is often the issue.

Change Ports: Avoid USB 3.0 (blue) ports; SP Flash Tool often prefers USB 2.0 ports.

Cable Quality: Use the original OEM cable or a high-quality data-sync cable.

The "Boot Key" Combo: Ensure you are holding the correct buttons (usually Volume Down or both Volume buttons) when plugging in the USB cable to trigger the VCOM port. Final Tip: Use the "Format All + Download" Caution

If you are still stuck at 100% DA, you might be tempted to switch from "Download Only" to "Format All + Download." Be careful: This will wipe your NVRAM/IMEI data, potentially leaving you with no cellular signal. Only use this as a last resort and ensure you have a backup of your device's original firmware.

Which MediaTek chipset or phone model are you currently trying to flash? Knowing the specific model can help narrow down the exact DA file you need.

How To install Sp Flash Tool -how to install sp flash tool in pc

Introduction: The Frustration of a Frozen Flash

You’ve set up SP Flash Tool, loaded the correct scatter file for your MediaTek (MTK) Android device, and clicked "Download." The red bar fills up slowly, then the purple bar, and finally, the yellow bar reaches 100%. But then it happens: "Download DA 100%" appears in the status log, and the process stops. No error message. No progress. Just a frozen tool and a bricked phone.

This is one of the most common and frustrating errors in the Android flashing community. The "DA" in "Download DA" stands for Download Agent—a small piece of firmware that SP Flash Tool sends to the phone’s RAM to manage the flashing process. When the tool gets stuck at 100% of this step, it means the DA was sent successfully, but the phone failed to execute it or handshake with the PC.

In this article, we’ll dissect exactly why this happens and provide 12 actionable solutions, ranked from most likely to most advanced.

Possible Causes:

3. Adjust SP Flash Tool Settings

Open SP Flash Tool → Options → Download:

Example log interpretation

Useful commands & options in SP Flash Tool

If you want, I can:

Related search suggestions: "suggestions":["suggestion":"MediaTek VCOM driver install","score":0.85,"suggestion":"SP Flash Tool Download DA 100 stuck fix","score":0.9,"suggestion":"MTK test point preloader mode","score":0.7]

SP Flash Tool Stuck on "Download DA 100%" - A Troubleshooting Guide

If your SP Flash Tool is stuck on "Download DA 100%" while trying to flash your device, don't worry, this guide will help you troubleshoot and possibly fix the issue.