Starsat Tv Software Update May 2026

To update your StarSat TV or receiver software, you can either perform an automatic update through the device menu or a manual update using a USB drive. Keeping your firmware current is vital for fixing bugs, improving performance, and ensuring compatibility with new features Method 1: Direct Update (Over-the-Air)

This is the simplest method if your device is connected to the internet. Open Settings : Use your remote to navigate to the screen and select Locate Support : Find the Check for Updates Software Update System Update ) and then Check for Update

: If a newer version is found, follow the prompts to download and install it automatically. samsung.com Method 2: Manual Update via USB

If your device is not connected to the internet or you need a specific recovery file, use a USB flash drive formatted to Download Firmware : Visit the official StarSat Software Download Center to find the latest file for your specific model (e.g., Prepare the File For most standard updates, copy the file directly to the root of the USB drive.

(if your device is stuck on "Boot"), you may need to rename the file. For example, GX chip models often require the file to be renamed to , while Android models like the require a folder named ROM update with the file inside also renamed to ROM update Perform the Update Insert the USB drive into the TV or receiver's USB port. Navigate to the USB Update section in your device's menu.

Select the file and wait for the process to complete (usually 5–10 minutes). Do not power off the device during this time. Official Support and Manuals Update the software on your Samsung smart TV or monitor

Conclusion: Stay Updated, Stay Entertained

The world of free-to-air and encrypted satellite TV moves fast. A timely Starsat TV Software Update can mean the difference between watching your favorite football match or staring at a black screen. By following the guidelines in this article—identifying your model, using safe firmware sources, performing USB updates correctly, and troubleshooting effectively—you ensure your Starsat receiver remains a powerful entertainment hub.

Remember: always back up your current channel list (Menu > USB Backup) before updating, and never rush the process. When in doubt, consult a local satellite technician or your region’s Starsat user community.

Now that you are equipped with this knowledge, go ahead and check your receiver’s version. Is it time for an upgrade?

Disclaimer: This article is for educational purposes. Decrypting pay-TV channels without a valid subscription may violate laws in your country. Always respect copyright and broadcasting regulations.

Introduction

Starsat is a popular brand of satellite TV receivers that offers a wide range of channels and services to its users. To ensure that users have access to the latest features, channels, and services, Starsat regularly releases software updates for its receivers. In this paper, we will discuss the importance of software updates for Starsat TV receivers, the process of updating the software, and the benefits that users can expect from these updates.

Why Software Updates are Important

Software updates are essential for any electronic device, including satellite TV receivers like Starsat. These updates help to:

Improve performance: Software updates can improve the performance of the receiver, fixing bugs and glitches that may be affecting its operation.
Add new features: Updates can add new features to the receiver, such as support for new channels, improved user interface, or new services like video on demand.
Enhance security: Software updates can also enhance the security of the receiver, protecting it from hacking and other cyber threats.
Ensure compatibility: Updates can ensure that the receiver remains compatible with the latest satellite TV systems and services.

How to Update Starsat TV Software

Updating the software on a Starsat TV receiver is a relatively straightforward process. Here are the steps:

Check for updates: The first step is to check if there are any software updates available for your Starsat receiver. You can do this by visiting the Starsat website or by using the receiver's built-in update feature.
Download the update: If an update is available, download it to your computer or USB drive.
Connect the receiver to the computer: Connect the receiver to your computer using a USB cable or Ethernet cable.
Run the update: Run the update software on your computer, following the on-screen instructions to update the receiver's software.

Benefits of Software Updates

The benefits of software updates for Starsat TV receivers include:

Improved performance: Updates can improve the performance of the receiver, providing a better viewing experience.
New features: Updates can add new features to the receiver, such as support for new channels or services.
Enhanced security: Updates can enhance the security of the receiver, protecting it from hacking and other cyber threats.
Increased compatibility: Updates can ensure that the receiver remains compatible with the latest satellite TV systems and services.

Common Issues with Software Updates

While software updates are essential for Starsat TV receivers, there are some common issues that users may encounter during the update process. These include:

Failed updates: In some cases, the update process may fail, causing the receiver to malfunction.
Compatibility issues: Updates may not be compatible with all receivers, causing problems with the update process.
Data loss: In some cases, updates may cause data loss, such as loss of channel settings or recordings.

Conclusion

In conclusion, software updates are essential for Starsat TV receivers, providing improved performance, new features, enhanced security, and increased compatibility. While there may be some common issues with software updates, these can be minimized by following the update process carefully and ensuring that the receiver is compatible with the update. By keeping their receiver's software up to date, users can ensure that they have access to the latest features, channels, and services.

I hope this helps! Let me know if you have any questions or need further clarification.

There is no specific mathematical equation related to this topic so no $$ syntax was used.

Keeping your StarSat TV or receiver updated is the best way to unlock new features, fix annoying bugs, and ensure your hardware stays compatible with the latest streaming and satellite standards. Whether you are looking for the latest "CHMax" channel features or just want a smoother menu interface, here is everything you need to know about the update process. 🛠️ Why Update Your StarSat Device?

Software updates, often called firmware, act as the "brain" of your TV. Updating helps with:

New Features: Recent StarSat updates have added visual overhauls to menus and features like CHMax.

Stability: Fixes for common issues like "boot stuck" states or pixelated channels.

Security: Patches that protect your device when connected to the internet.

Performance: Better support for IPTV, YouTube, and high-efficiency video coding (HEVC). 📥 Where to Find Official Updates

It is critical to use the exact software designed for your specific model to avoid "bricking" (permanently damaging) your device. Authorized sources include:

To update the software on your StarSat Smart TV or Satellite Receiver, you can generally use either an automatic over-the-air (OTA) method via your TV's settings or a manual method using a USB drive. 1. Update via TV Settings (Android Smart TVs)

If you have a StarSat Google UHD Smart TV or similar Android-based model, you can update directly through the internet:

Navigate to Settings: Use your remote to select the Gear icon (Settings) at the top right of your home screen.

Select Device Preferences: Scroll down and select Device Preferences (on some models, this may simply be About). System Update: Choose About, then select System update.

Check for Updates: Select Check for update. If a new version is found, follow the on-screen prompts to download and install it.

Auto-Update: You can often enable "Auto-download updates" in this menu to keep your TV current automatically. 2. Manual Update via USB (Satellite Receivers & LED TVs) Starsat Tv Software Update

For StarSat Satellite Receivers (like the SR-260H4K or SR-T15HD) or if the OTA method fails, use a USB flash drive: How to update the software on an Android TV - TCL Support

Updating your StarSat TV or receiver software ensures you have the latest security patches, bug fixes, and features like the CHMax channel list. Most modern StarSat devices support both Online (OTA) updates and USB manual upgrades. Method 1: Online Update (Internet Required)

If your device is connected to Wi-Fi or Ethernet, this is the simplest method:

Press Menu on your remote and navigate to Settings or System. Look for Software Update or Network Update. Select Online Update or HTTP Upgrade.

If a new version is detected, select it and press OK to download and install.

The device will reboot automatically once finished. Do not power off during this process. Method 2: USB Manual Update

For users without a stable internet connection or for specific firmware versions:

Download Firmware: Visit official StarSat support sites like swdw.net or cwdw.net.

Prepare USB: Format a USB drive to FAT32. Extract the downloaded .bin file to the root directory of the drive.

Install: Plug the USB into the receiver. Go to Menu > Expansion > USB Menu.

Find your software file, press OK, and confirm the update when prompted. Recovery Mode (Force Update)

If your receiver is stuck (e.g., "boot" loop), you can force an update:

Rename your firmware file to RomUpdate.bin and place it in a folder named RomUpdate on your USB.

Power off the receiver, insert the USB, and hold the Power Button on the front panel while powering it back on until "UPDATE" appears on the display. Key Benefits of Updating What Is Firmware? Types And Examples - Fortinet

Updating your StarSat device is essential for accessing new features, improving system stability, and ensuring compatibility with the latest satellite frequencies. Whether you are using a 4K receiver or a standard HD model, the process typically involves downloading the specific firmware for your model and installing it via a USB drive. Where to Find Official Software

StarSat provides official software updates through several dedicated repositories. You should always use these authenticated sources to avoid damaging your hardware: Software DW : The primary portal for official StarSat firmware. Starsat.com

: The official corporate site which often hosts manuals and software for specific models like the StarSat SR-5080HD Extreme Alternative Mirrors : Sites like

are also commonly used for specific model searches (e.g., searching "260" for the StarSat SR-260H4K Update Procedure (via USB)

This is the standard method for most modern receivers like the StarSat SR-200HD Extreme StarSat SR-5080HD Format your USB : Ensure your USB flash drive is formatted to Download & Extract : Download the firmware for your model number. If the file is zipped, extract the file to the root directory of your USB. Insert & Navigate : Plug the USB into the receiver. Use your remote to go to System/Tools Software Update Upgrade by USB Select File

: Locate the firmware file on your USB and confirm the update. Reboot & Reset

: The device will automatically restart once finished. It is highly recommended to perform a Factory Reset after any update to ensure optimal performance. Recovery Mode (Stuck at Boot)

If your receiver is stuck on the "Boot" screen due to a failed update, you can perform a forced recovery: For Ali Chip Devices StarSat SR-200 HD 4K ): Rename the software file to aliosd_update.bin For GX Chip Devices StarSat SR-4080 ): Rename the file to : Power off the STB, insert the USB, then hold the Power Button

on the front panel while turning the power back on. Release it when "UPG" or "Update" appears on the display. Important Precautions Model Accuracy

: Never attempt to flash software meant for a different model; this can permanently "brick" (wreck) your receiver. Power Stability

power off the receiver or remove the USB during the update process. Update Frequency : It is recommended to check for new patches every 2–3 months to keep your channel lists and features current. or specific recovery file names for a particular StarSat model?

Title: Starsat TV Software Update: Enhancing Performance, Security, and User Experience

Introduction

In the rapidly evolving landscape of digital satellite television, maintaining up-to-date software is no longer optional—it is essential. Starsat, a leading name in the satellite receiver market, regularly releases firmware updates to improve device functionality, add new features, fix bugs, and enhance security protocols. This article provides a comprehensive overview of the latest Starsat TV software update, including its benefits, installation process, and important precautions.

Why Software Updates Matter for Starsat Receivers

Starsat receivers operate on proprietary firmware that controls everything from channel scanning and decoding to internet-based features like IPTV and middleware support (e.g., Stalker, Ministra). A software update can:

Fix known bugs – Resolve freezing, audio/video sync issues, or EPG (Electronic Program Guide) errors.
Improve compatibility – Ensure smooth operation with new satellite transponders, encryption systems, or streaming protocols.
Boost security – Patch vulnerabilities that could be exploited by malicious software or unauthorized access.
Add features – Introduce updated user interfaces, faster channel zapping, recording enhancements, or support for new codecs.
Extend receiver lifespan – Keep older hardware compatible with modern broadcast standards.

Key Highlights of the Latest Starsat Update (Firmware Version Example: v2.45)

While specific version numbers vary by model (e.g., Starsat 2000 HD Extreme, SR-x8, or 9000 series), the most recent general update includes:

Optimized Channel Scan – Faster blind scan and automatic transponder detection.
Improved IPTV Integration – Better buffering management and support for multiple playlist formats (M3U, Xtream Codes API).
Enhanced Multimedia Player – Added support for HEVC (H.265) playback via USB and network shares.
User Interface Refresh – Smoother navigation and customizable channel list layouts.
Security Patch – Closed potential backdoors and improved protection against clone devices.
Bug Fixes – Resolved intermittent Wi-Fi dropouts and subtitle display issues on specific channels.

How to Perform the Starsat Software Update

Starsat provides two primary methods for updating firmware. Always verify your receiver model before proceeding.

Method 1: USB Update (Recommended for Stability)

Download the correct firmware from the official Starsat support portal or authorized distributor site. Use the exact model number (found on the receiver’s back label).
Format a USB flash drive to FAT32 and ensure it is empty.
Copy the firmware file (usually .bin, .abs, or .stf) to the USB root directory. Do not rename the file.
Turn off the Starsat receiver using the rear power switch.
Insert the USB drive into the receiver’s USB port.
Turn on the receiver while repeatedly pressing the “Menu” or “Upgrade” button (check your model’s manual) or navigate via: Menu → Tools → Software Update → USB Upgrade.
Select the file and confirm the update. Do not interrupt power or remove the USB during the process (typically 2–5 minutes).
Reboot the receiver when prompted.

Method 2: Online Update (Internet Connection Required) To update your StarSat TV or receiver software,

Connect the Starsat receiver to the internet via Ethernet or Wi-Fi.
Go to Menu → Settings → Software Update → Online Upgrade.
The receiver will check for the latest version. If available, select “Download and Install.”
Wait for the download and automatic installation. The device will reboot once finished.

Important Precautions

Do not power off the receiver during the update. A sudden shutdown can permanently brick the device.
Use stable power – Connect the receiver to a UPS or surge protector to avoid voltage fluctuations.
Match firmware exactly – Installing software intended for a different Starsat model can cause boot loops or loss of features.
Backup your channel list – Export your current settings and favorites via USB before updating, as some updates may reset factory data.
Avoid unofficial firmware – Only use software from verified Starsat sources. Modified firmware may include malware or disable legitimate functions.

Troubleshooting Common Update Issues

| Problem | Likely Cause | Solution | |---------|--------------|----------| | Receiver won’t detect USB | Wrong file system or corrupted USB | Reformat USB to FAT32; try another port or USB drive | | Stuck on “Boot” after update | Incorrect firmware or interrupted update | Perform emergency recovery via serial cable (advanced) or contact support | | No sound after update | Audio settings reset | Check HDMI/SPDIF output settings; change to “PCM” or “Auto” | | Missing channels | Factory reset cleared lists | Restore backup or rescan satellites |

Post-Update Best Practices

After successfully updating your Starsat receiver:

Perform a factory reset (Menu → Installation → Factory Settings) to clear residual old data, then rescan your satellites.
Re-enter your internet and server settings (if using IPTV or CCCam).
Rescan or reload your channel list.
Test the new features – confirm that recording, timeshift, and streaming work as expected.

Conclusion

Regular software updates are the lifeblood of any sophisticated satellite receiver. The latest Starsat TV software update brings tangible improvements in speed, reliability, and feature set. By following the correct update procedure and taking necessary precautions, users can ensure their device continues to deliver optimal performance for years to come. Always stay informed through official Starsat channels and avoid the temptation of unverified third-party firmware.

Final Note: Firmware update files and instructions differ between models. Always verify compatibility with your exact Starsat receiver before proceeding. When in doubt, consult an authorized service center.

End of article

Introduction

Starsat is a popular brand of satellite TV receivers that offers a wide range of channels and services to its users. To ensure that users have access to the latest features, channels, and services, Starsat regularly releases software updates for its receivers. In this paper, we will explore the process of updating the software on Starsat TV receivers, the benefits of updating, and the common issues that may arise during the update process.

What is a Software Update?

A software update is a new version of the software that is released by the manufacturer to improve the performance, security, and functionality of the device. In the case of Starsat TV receivers, software updates are released to:

Add new channels and services
Improve the user interface and user experience
Fix bugs and technical issues
Enhance security and prevent hacking
Support new technologies and features

Types of Software Updates

There are two types of software updates available for Starsat TV receivers:

Factory Update: This type of update is done by the manufacturer to fix critical issues or add new features to the receiver. The update is usually done at the factory and requires technical expertise.
User Update: This type of update is done by the user to update the receiver's software to the latest version. This can be done through the receiver's menu or using a computer.

How to Update Starsat TV Software

Updating the software on a Starsat TV receiver is a straightforward process that can be done in a few steps:

Check the Current Software Version: Go to the receiver's menu and select "System Information" or "Software Version" to check the current software version.
Download the Latest Software: Visit the Starsat website or a authorized dealer website to download the latest software version for your receiver.
Prepare a USB Drive: Insert a blank USB drive into your computer and format it to FAT32.
Copy the Software to the USB Drive: Copy the downloaded software file to the USB drive.
Insert the USB Drive into the Receiver: Insert the USB drive into the receiver's USB port.
Update the Software: Go to the receiver's menu and select "Software Update" or "USB Update". The receiver will detect the software file on the USB drive and prompt you to update.
Wait for the Update to Complete: The update process may take a few minutes to complete. Do not turn off the receiver during the update process.

Benefits of Updating Starsat TV Software

Updating the software on your Starsat TV receiver offers several benefits, including:

New Channels and Services: Software updates often add new channels and services to your receiver.
Improved Performance: Updates can improve the receiver's performance, stability, and speed.
Security Patches: Updates often include security patches to prevent hacking and protect your personal data.
New Features: Updates can add new features to your receiver, such as support for new technologies or improved user interface.

Common Issues During Software Update

While updating the software on your Starsat TV receiver, you may encounter some common issues, including:

Update Failed: The update process may fail due to a corrupted software file or a technical issue.
Receiver Not Detecting USB Drive: The receiver may not detect the USB drive or the software file on it.
Software Update Not Available: The receiver may not have an available software update.

Troubleshooting Tips

If you encounter any issues during the software update process, try the following troubleshooting tips:

Check the Software File: Ensure that the software file is not corrupted and is compatible with your receiver.
Check the USB Drive: Ensure that the USB drive is formatted to FAT32 and is functioning properly.
Restart the Receiver: Restart the receiver and try the update process again.
Contact Customer Support: If the issue persists, contact Starsat customer support or a authorized dealer for assistance.

Conclusion

Updating the software on your Starsat TV receiver is an essential process that ensures you have access to the latest features, channels, and services. While the update process is straightforward, you may encounter some common issues. By following the troubleshooting tips and ensuring that you have a compatible software file and a functioning USB drive, you can successfully update your receiver's software.

Recommendations

Regularly Check for Software Updates: Regularly check the Starsat website or a authorized dealer website for software updates.
Use a Compatible USB Drive: Use a compatible USB drive that is formatted to FAT32.
Backup Your Settings: Backup your receiver's settings before updating the software.
Contact Customer Support: If you encounter any issues during the update process, contact Starsat customer support or a authorized dealer for assistance.

Updating your Starsat TV ensures you have the latest features, security patches, and performance improvements

. Whether you're using a Smart TV or a satellite receiver, the process typically involves either an automatic online update or a manual USB upgrade. Update Methods for Starsat Devices 1. Online Software Update (Smart TVs)

If your Starsat TV is connected to the internet, this is the easiest method. Access Settings : Press the button on your remote. Navigate to About Device Preferences Check for Updates System Update Check for Update

: If an update is available, follow the on-screen prompts to download and install it. 2. Manual USB Update (Satellite Receivers & TVs)

For offline updates or to fix software bugs, you can use a USB flash drive. Downloads - SmartTech TV

Think of a software update for your StarSat device not as a chore, but as a "performance tune-up" for your living room. Whether you’re using a classic receiver or a modern 4K Android box like the SR-X1 Pro, keeping the software current is the best way to unlock new features and keep your entertainment running smoothly. Why Update?

Updating your firmware isn't just about technical maintenance; it’s about improving your daily viewing experience:

Fresh Look: Updates often revamp menus and info bars, making navigation feel modern and snappy.

Better Features: New software can add "CHMax" features or improve multimedia playback via USB.

Stability: It patches bugs and resolves hardware issues, such as "no power" glitches or signal reliability. How to Stay Current Conclusion: Stay Updated, Stay Entertained The world of

For the best results, always source your files from official or trusted community hubs:

Official Sites: Check repositories like SWDW or SatSW for the latest .bin files specific to your model.

Method: Most modern units allow for a quick USB Software Upgrade—just load the file, plug it in, and follow the on-screen prompts.

Online Updates: If you have a smart model, you can often update directly over the internet via the settings menu. Update the software on your Samsung smart TV or monitor

Updating your StarSat TV or receiver is the best way to fix annoying bugs, unlock new features, and ensure your device runs at peak performance. Whether you are using a standard receiver like the SR-2090HD or a high-end Smart TV, staying current with the latest firmware is essential for a smooth viewing experience. Why Update Your StarSat TV Software? Regular software updates provide several key benefits:

Performance Boost: Updates often optimize system resources, making your device faster and more responsive.

New Features: Manufacturers frequently add new apps, streaming capabilities, or interface improvements.

Bug Fixes: If you're experiencing freezing or audio issues, a software patch can often resolve these glitches.

Security: Keeping your firmware updated helps protect your device from potential security vulnerabilities. How to Update Your StarSat TV Software

There are two primary ways to update your StarSat device: directly through the internet or manually using a USB drive. Method 1: Internet (OTA) Update

This is the easiest method for Smart TVs and connected receivers. How to Update System Software in your SMART TV?

Keeping your StarSat TV or receiver updated is essential for fixing bugs, improving signal stability, and accessing new apps or features. Depending on your model, you can update via the internet (OTA) or manually using a USB drive. 🚀 How to Update Your StarSat TV Method 1: Online Update (Smart/Android TVs)

If your StarSat TV has built-in Wi-Fi, this is the easiest method. button on your remote. Navigate to Device Preferences System Update Software Update Check for Update If an update is found, click Download/Install turn off the TV during this process. Method 2: Manual Update (via USB)

Use this method if your TV isn't connected to the internet or if you need to recover a stuck device. Sony India Find your model:

Check the sticker on the back of your TV for the exact model number. Download firmware: StarSat Official Website or trusted satellite software portals like sww.net.net Prepare the USB: Use a clean, FAT32 formatted USB drive. Unzip the downloaded file and move the file to the of the USB (not inside a folder). Plug the USB into the TV's USB port while the TV is

Turn the TV on. Many models will auto-detect the file and begin "Upgrading Software". Force Update: If it doesn't auto-start, hold the

button on the TV panel while plugging it in until the "Update" screen appears. samsung.com 🛠️ Troubleshooting Common Update Issues Potential Cause "No File Found" Incorrect file name or folder Rename file to update.bin depending on chip type. Boot Loop/Stuck Interrupted update

Perform a "USB Recovery" by holding the power button during startup. Error 404/No Update Server issues

StarSat's South African branch ceased operations in late 2024; use the International Site for global firmware. 💡 Pro Tips for a Safe Update Update the software on your Samsung smart TV or monitor

To update the software on your StarSat TV Satellite Receiver , you can generally use two primary methods: USB update for precise version control or an online update for smart devices Method 1: Manual Update via USB

This is the most reliable method for both Smart TVs and Satellite Receivers. Download the Firmware Visit official repositories like StarSat International or trusted software hosts such as

Search for your specific model (e.g., "T15" or "SR-260") to find the latest version. Prepare the USB Drive Format your USB drive to If the downloaded file is a ZIP, extract it to get the Place the file in the root directory (not inside any folders). Install the Update Insert the USB into the device. For Receivers : Navigate to Menu > USB Menu , select the file, and press For Recovery/Forced Update

: If the device is stuck, power it off, insert the USB, and hold the Power button

while turning it back on until "Update" or "UPG" appears on the display. power off the device during the process. Once rebooted, it is highly recommended to perform a Factory Reset (often using the default password ) to ensure system stability. Method 2: Online Update (Smart Models)

If your StarSat device is an Android/Smart model connected to the internet, you can update directly through the interface. How to Update System Software in your SMART TV?

Updating your StarSat TV or satellite receiver is a straightforward process that helps fix bugs, add new channels, and improve overall performance. Depending on whether you have a Smart TV or a Satellite Receiver (STB), the update method differs. Method 1: Updating StarSat Smart TVs (Android-based)

Most StarSat LED TVs run on an Android-based platform. You can usually update them directly through the internet.

Check Internet Connection: Ensure your TV is connected to a stable Wi-Fi or Ethernet network.

Access Settings: Press the Home button on your remote and navigate to Settings.

Navigate to About: Select Device Preferences or About, then look for System Update or Software Update.

Download and Install: Click Check for Updates. If one is found, select Download and let the TV restart automatically once finished. Method 2: Updating StarSat Satellite Receivers (via USB)

If you are using a StarSat decoder (like the SR-260H4K or SR-5090HD), updates are typically done manually using a USB drive. How to update the software on an Android TV - TCL Support

Starsat vs. Competitors: Why Updates Matter More Here

Unlike premium brands like Dreambox or Vu+ that use open-source Linux, Starsat runs a proprietary RTOS (Real-Time Operating System). This means you rely entirely on the manufacturer and hobbyist softcam teams. Competitors like Tiger or GTMedia release updates monthly; Starsat releases them weekly due to high demand for softcam keys. If you own a Starsat, you have accepted the responsibility of updating every 2–4 weeks.

Q5: Can I downgrade to an older software version?

A: Yes, but with caution. Some newer bootloaders block downgrades. Use the same USB method but with an older .bin file. If it fails, you must use the RS-232 method.

Identifying Your Starsat Model (Crucial Step)

There is no single "Starsat software." Every hardware revision requires a specific file. Installing the wrong firmware will kill your receiver.

How to find your model:

Look at the sticker on the bottom or back of the receiver.
Navigate to: Menu → System Information → Model Number.

Common models include:

Starsat SR-2000 HD Extreme
Starsat SR-3030 HD
Starsat SR-5050 HD
Starsat X-Max / Hyper
Starsat 90000/92000 series (Linux based)

Remember: A file for the SR-2000 will NOT work on the SR-5050.