Tysso Prp-300 Driver Download ~upd~ Windows 10 May 2026

Complete Guide: TYSSO PRP-300 Driver Download for Windows 10 (2025 Update)

Struggling to get your TYSSO PRP-300 receipt printer working on a modern Windows 10 PC? You are not alone. The TYSSO PRP-300 is a reliable thermal receipt printer widely used in retail, hospitality, and ticketing. However, because it is an older model (often leveraging legacy ESC/POS commands), Windows 10 does not automatically recognize it via Plug-and-Play.

In this guide, we will walk you through everything you need to know: where to find the official driver, how to install it step-by-step, common troubleshooting errors, and alternative solutions if the official package fails.

4. Troubleshooting Common Issues

| Issue | Probable Cause | Solution | | :--- | :--- | :--- | | "Unknown Device" in Device Manager | Windows did not auto-detect the driver. | Right-click "Unknown Device" > Update Driver > Browse my computer > Let me pick > Select USB Printing Support. | | Printer prints gibberish | Wrong driver model or baud rate mismatch. | In Printer Properties > Ports, ensure the correct USB port (e.g., USB001) is checked. Try re-installing using the Epson TM-T88 driver emulation. | | Test page prints blank | Paper loaded incorrectly. | Ensure the thermal paper is loaded "shiny side up" (thermal coating facing the print head). | | Light is blinking Red | Paper cover open or paper jam. | Open the lever, clear any jam, ensure paper is seated correctly, and close the lever firmly. | tysso prp-300 driver download windows 10

Step 3: Install the Driver

  1. Once downloaded, locate the .zip file. Right-click it and select Extract All.
  2. Open the extracted folder and find the Setup.exe or Install.exe file.
  3. Right-click the file and select Run as Administrator.
  4. Follow the on-screen prompts:
    • Select your connection type (USB is most common).
    • Accept the license agreement.
    • Click Install.
  5. Crucial Step: During installation, Windows 10 may pop up a security warning asking if you trust the publisher. Click Install this driver software anyway.

4. Alternative: Using Generic ESC/POS Drivers

If the official TYSSO driver is corrupted or unavailable, use a generic ESC/POS driver. The PRP-300 emulates the Epson ESC/POS command language, which is industry standard.

For Ethernet (Network):

  • Assign a static IP to the printer (check manual: default is 192.168.1.100).
  • In Windows → Add a printer → The printer I want isn't listed → Add a TCP/IP printer → Enter IP address → Select Custom → Use RAW protocol, Port 9100.

3. [Official] TYSSO PRP-300 Driver Download for Windows 10

Important: TYSSO’s original website (tysso.com) no longer hosts legacy drivers. However, the official OEM driver is maintained under the Xprinter XP-300 series (same hardware). Complete Guide: TYSSO PRP-300 Driver Download for Windows

Error 3: Printer is offline even when connected

Fix:

  • Go to Printers & scanners → Click PRP-300 → Manage → Printer properties → Advanced tab → Uncheck "Keep printed documents".
  • Turn off "SNMP Status Enabled" under the Ports tab → Configure Port.

2. The Primary Solution: Use the Generic ESC/POS Driver

Windows 10 has a built-in driver that works perfectly for basic printing (receipts, text, logos). Once downloaded, locate the

Step-by-Step:

  1. Plug the PRP-300 into a USB port (or serial/parallel if using an adapter).
  2. Open Settings > Bluetooth & Devices > Printers & Scanners.
  3. Click "Add device" – Let Windows search.
  4. If not found, click "Add manually" (The printer that I want isn't listed).
  5. Select "Add a local printer or network printer with manual settings".
  6. Choose "USB001 (Virtual printer port for USB)".
  7. In the manufacturer list, select "EPSON".
  8. In the printers list, select "EPSON TM-T88III" or "EPSON TM-T88IV" (These are the universal ESC/POS standards).
  9. Name it "Tysso PRP-300" and finish.

Result: The printer will now work with any POS software (Square, Loyverse, Openbravo, etc.).