UFS HWK Support Suite Setup v02.10.013 (often referred to as the "hot" update) is a core software package from
used to initialize and update the Universal Flashing Software (UFS) box and its Hardware Key (HWK) module
. This specific version was a critical release designed to fix connectivity issues and provide the necessary drivers for professional mobile phone servicing and flashing. Key Features Driver Installation
: Installs the official USB drivers required for the computer to recognize the UFS/HWK hardware. Module Activation
: Includes the "Update Client" which validates the HWK module's authenticity and activates it for use with various service tools. Firmware Updates
: Allows technicians to update the internal firmware of the box to support newer mobile device models. Support Access : Provides a direct link to the SarasSoft support area
for downloading brand-specific flash files and documentation. Installation Steps To properly set up the suite, follow this general workflow: Driver Setup
: Install the driver software (typically found in a folder like UFS_USB_DRIVER_20830_V8 ) before connecting the hardware. Suite Installation HWK_Support_Suite_Setup_v02.10.013.exe
installer. If prompted by Windows Security regarding "UAB DIGITEKA," select "Trust" to allow the drivers to install. Hardware Connection : Connect your UFS box to the PC via USB. Client Update UFSx Control Panel Update Client "Check Box" to view hardware info, then click to synchronize the HWK module with the server. Software Suite
: Once the Support Suite is updated, you can then install the brand-specific "Suite Setup" (e.g., for Samsung, Nokia, or Sony Ericsson) to begin device servicing. Critical Requirements Original Hardware
: An original, HWK-enabled UFS box is required; cloned boxes often fail the update process. Internet Connection
: A working internet connection is mandatory for the initial module activation/update through the SarasSoft servers.
For further assistance with specific error codes like "Account Expired" or "Connection Error," technicians often consult the for server status and community-driven fixes. supported by this specific version? Hwk Support Suite Setup V 3.03 - Facebook
Setting up the UFS HWK Support Suite v02.10.00 is a specific process required for mobile technicians using the SarasSoft UFS-3 box. This software acts as the bridge between your hardware box and the specialized flashing tools for various mobile brands. Pre-Installation Checklist Before starting, ensure you have the following:
Original HWK Module: A genuine HWK key installed inside your UFS-3 box.
Stable Internet Connection: The Update Client must connect to the SarasSoft server to authorize your box.
Clean System: Uninstall any previous versions of HWK Support Suite or HWK Suite to avoid driver conflicts. Step-by-Step Setup Guide 1. Clean Previous Drivers
Remove all existing UFS and HWK software from your PC. This includes deleting older drivers through the Device Manager and uninstalling software via the Control Panel. 2. Install the Support Suite Run the HWK_Support_Suite_Setup_v02.10.000.exe installer.
Follow the on-screen prompts. It is recommended to use Administrative privileges during this process.
Do not connect your UFS box yet; the installer needs to register the core files first. 3. Connect Hardware and Install Drivers
Plug your UFS-3 box (with the HWK module inside) into a USB port.
When Windows prompts for drivers, point it to the installation directory (usually C:\Program Files\SarasSoft\UFS\UFS_USB_Driver) to install them manually if they don't auto-load. 4. Run the Update Client ufs 210 hwk support suite setup v0210 13 hot
Open the HWK Update Client (found in your Start Menu or the SarasSoft folder).
Click Next. The software will read your Box ID and HWK Serial Number. Click Update HWK.
Note: If the server is offline or busy, you may see errors. This step is mandatory; the actual "HWK Suite" will not install until the Update Client successfully authorizes your hardware. 5. Install the Main HWK Suite
Once the Update Client confirms a successful update, keep it open (or minimize it) and run the main setup file: HWK_Suite_Setup_v02.10.000.exe.
This package contains the actual software for Samsung, Nokia (DCT4/BB5), LG, and Sony Ericsson. Troubleshooting Common Errors Error Message Likely Cause "Your HWK is not authorized" Failed update process Re-run the Update Client. "Authentication Stage Error" Server connectivity
Check your internet or wait for the SarasSoft server to be back online. "Box NOT Found" Driver issue Re-install the UFS drivers manually via Device Manager.
Pro-Tip: If you encounter "Panel Hanging" issues during the "Check Box" phase, try using an older version of the SarasSoft USB drivers to see if stability improves.
HWK + UFS не могу скачать suite кто в курсе? сайт sarunosoft
The UFS 2.1.0 HWK Support Suite Setup v02.10.13 (commonly referred to as "v02.10.13 hot") is a legacy maintenance and update utility for the Universal Flashing Suite (UFS) hardware, specifically those equipped with the HWK (Hardware Key) module. Developed by SarasSoft, this software was a staple for mobile technicians repairing and flashing older generation devices from manufacturers like Nokia, Samsung, and Sony Ericsson. What is the HWK Support Suite?
The Support Suite is the foundational software required to bridge the communication between your PC and the UFS/HWK hardware. Version 02.10.13 is known for its stability in providing:
Driver Connectivity: Essential USB drivers to ensure the Windows OS recognizes the UFS box.
Hardware Authentication: The "Update HWK" feature, which authenticates the original hardware with the SarasSoft servers (though server availability for legacy versions is now limited).
Module Compatibility: Support for BB5, DCT4, and various mobile processing chips used in early smartphone and feature phone eras. Step-by-Step Setup Guide
Setting up this specific version requires a precise sequence to avoid common registry and "Unauthorized Copy" errors. Preparation & Cleaning: Disconnect your UFS box from the PC.
Uninstall any previous versions of the UFS or HWK suites via the Control Panel.
Delete the SarasSoft folder from C:\Program Files\ (or C:\Program Files (x86)\) to remove lingering configuration files. Install HWK Support Suite v02.10.xx: Run the UFS_HWK_Support_Suite_Setup_v02.10.00.exe first.
Connect your UFS/HWK box when prompted by the hardware wizard.
If you are on Windows 10 or newer, you may need to manually point to the drivers located in C:\Program Files\SarasSoft\UFS\UFS_USB_Driver. Apply the v02.10.13 "Hot" Update:
Install the specific v02.10.13 update over the base installation. Run the UFS Panel or Update Client as an Administrator.
Click Check Box to verify connectivity, then click Update HWK.
Note: If the servers are down, you may need a local registry backup or a "fixed" version of the panel. Install the Main Suite: UFS HWK Support Suite Setup v02
Once the HWK is successfully updated, install the HWK Setup Suite. This adds the actual flashing tools like SAMs, LG_GSM, and SeDBx. Troubleshooting Common Issues
"Unauthorized Copy" Error: This typically occurs on Windows 10 or 64-bit systems due to driver signature enforcement or mismatched software versions. Try running the tools in Windows XP Compatibility Mode.
Connection Failed: Ensure you are using a high-quality USB cable and a port directly on the motherboard (avoid USB hubs).
Server Offline: Because the SarasSoft servers are largely inactive for older versions, many users rely on offline registry patches or standalone tools like GSMForum for workarounds. Unlockers.ru
Установка UFS-HWK на второй комп - Форумы Unlockers.ru
HWK Support Suite Setup v02.10.000 (UFS-210) Technical Report HWK Support Suite Setup v02.10.000 is an official software bundle from designed for the UFS (Universal Flashing System) / HWK (Hardware Key)
platform. This professional-grade utility is essential for mobile phone technicians to perform service tasks such as flashing, unlocking, and repairing legacy handsets. Executive Summary
The suite acts as the central interface for SarasSoft hardware, specifically managing the box and its integrated HWK module
. It provides the necessary drivers, firmware updates, and brand-specific software modules required to interact with mobile devices from manufacturers like Nokia, Samsung, Sony Ericsson, and Motorola Core Functionalities
The support suite streamlines several critical workshop workflows: Hardware Initialization
: Installs the verified USB drivers required for the PC to communicate with compatible UFS/HWK hardware. Update & Activation Client : Includes an UpdateClient.exe
that validates the hardware activation, updates the HWK module firmware, and synchronizes with official SarasSoft servers. Module Management
: Serves as a centralized launcher for brand-specific service tools (e.g., for Samsung, King2008.exe for Sony Ericsson). Device Repair Services : Enables deep-level servicing including: : Writing official firmware packages to devices.
: Removing SIM locks, including RSA algorithm bypasses for certain legacy models. Software Correction
: Repairing errors such as "No Service," "No Network," or "Contact Service". GDFS Maintenance
: Reading, writing, and modifying GDFS parameters (calibration and battery settings). Technical Components
The software package typically includes the following executable files and drivers: : The primary suite interface. UpdateClient.exe
: The mandatory component for hardware validation and firmware updates. SAMs.exe / King2008.exe : Specialized modules for specific mobile brands. FTDI USB Drivers
: Essential for the serial-to-USB communication used by the UFS box. Requirements for Use
To utilize the v02.10.000 suite effectively, the following are required: : An original, HWK-enabled UFS box (such as the UFS Micro Box OS Compatibility
: Designed primarily for legacy Windows environments (common in mobile repair shops). Active Account Using the “Hot” Patch for Newer Phones v0210
: A valid SarasSoft support account is needed to access official download areas for flash files and documentation. Version History Note v02.10.000
was a significant release for legacy device support, newer versions (such as
) have been released to maintain compatibility with modern server protocols and newer mobile hardware modules. for this specific version or a list of supported Nokia/Samsung models Hwk Support Suite Setup V 3.03 - Facebook
The UFS HWK Support Suite Setup v02.10.00 (and its subsequent hotfix, v02.10.13) is a legacy software package used primarily by mobile phone technicians to manage and repair various mobile devices, particularly older Nokia, Samsung, and Sony Ericsson models. This suite acts as the driver and interface manager for the UFS (Universal Flashing Software) box equipped with an HWK (Hardware Key). Key Components and Usage
Purpose: It is used for "flashing" (reinstalling or updating) firmware, unlocking, and repairing IMEI or software-related issues on older mobile handsets.
The "Hotfix" (v02.10.13): The "hot" or hotfix version was released to address bugs in the main v02.10.00 release, specifically fixing connection errors and server authentication issues that prevented the HWK module from updating correctly.
SarasSoft: This is the original developer of the UFS/HWK hardware and software ecosystem. Setup Sequence
For the suite to function, technicians typically follow a strict installation order:
Support Suite: Install HWK_Support_Suite_Setup_v02.10.00.exe.
HWK Update: Run the "HWK Update Client" included in the suite to authenticate the hardware key with the SarasSoft servers.
Hotfix: Apply the HWK_Support_Suite_Setup_v02.10.13.exe hotfix to resolve initial version bugs.
Major Suite: Finally, install the main HWK_Suite_Setup_v02.10.00.exe (the actual flashing tools). Availability and Legacy Status
Official Support: Official servers for HWK updates have been largely offline or intermittent for years, as the hardware is considered obsolete in the modern smartphone era.
Community Archives: Most technicians now rely on archives found on forums like GSM-Forum or Service-GSM to find these specific setup files.
Note: Because this software is legacy and often requires disabling driver signature enforcement on modern Windows versions (Windows 10/11), it is primarily used in specialized repair environments for "vintage" phone restoration.
v0210.13 was not designed for Android 5.0+. To work on a Galaxy S4 (i9505) with Android 4.4.2:
ufs_flash.dll in the installation folder with a community-modified version (search “UFS210_KitKat_patch”).You cannot simply double-click the installer. The UFS210 is sensitive to system environment. Follow these prerequisites strictly.
1. System Requirements
2. Driver Installation
3. Suite Installation
UFS_210_HWK_Support_Suite_v0210_13_Hot.exe as admin4. Box Firmware Update
5. Activation / Security
.lic) might be needed6. Operational Check