Upgrade Medianav 9.1.3 | To 1.0.13.1 __exclusive__

It is not possible to upgrade a MediaNav unit from version 9.1.3 to 1.0.13.1 via a simple software update. These two versions run on fundamentally different hardware and operating systems:

Version 9.1.3 (MediaNav Evolution): Based on Windows CE 6.0.

Version 1.0.13.1 (MediaNav Evolution 2 / ULC4): Based on Linux and supports modern features like Android Auto and Apple CarPlay.

Because the 1.0.13.1 software requires a more powerful processor and a more sensitive capacitive touchscreen, it cannot run on the older Windows-based hardware. Why You Can't "Software Update" to 1.0.13.1

While the user interfaces may look similar, the internal architecture is completely different.

Hardware incompatibility: The Linux-based units (v1.0.x) use a different SoC (System on Chip) compared to the Windows CE units (v9.x.x).

Operating Systems: Version 9.1.3 is the final major official update for the Windows CE-based Evolution units. Version 1.0.13.1 is the starting point for the newer Linux-based "ULC4" units. How to Actually Get Version 1.0.13.1 (Hardware Swap)

If you want the features of version 1.0.13.1, such as smartphone mirroring, you must replace the entire head unit.

Purchase a MediaNav Evolution 2 (ULC4): Look for units from 2018+ vehicles. These units usually have a software version starting with 1.0.x.

Configuration is Required: A used unit from another car will not work "plug-and-play" because it is locked to the original vehicle's VIN.

Specialist Tools: You will need a specialist or tools like a USB to OBD2 adapter and software (like ddt4all) to code the new unit to your car's VIN and specific features (e.g., rearview camera, ECO drive menus). Alternative: Enhancing Your Current 9.1.3 Unit

If you cannot swap the hardware, you can still improve your version 9.1.3 unit using unofficial community software or official map tools: Update MediaNav 9.1.3 to Android version 1.0.13.1? upgrade medianav 9.1.3 to 1.0.13.1

Directly upgrading a MediaNav device from version via a software update is not possible

because they run on different hardware and operating systems Version 9.1.3 is the final official update for the MediaNav Evolution (v1) , which runs on Windows CE Version 1.0.13.1 (and other 1.0.x.x versions) belongs to the MediaNav Evolution 2 (ULC4) , which runs on and supports Android Auto/Apple CarPlay. Differences Between Systems MediaNav Evolution (v1) MediaNav Evolution 2 (ULC4) Firmware Versions 5.x.x to 9.1.3 1.0.x.x to 1.0.15.x Operating System Windows CE 6 Hardware Type LG LAN5200 LG LAN5800 Connectivity Standard Bluetooth/USB Android Auto & Apple CarPlay How to Get Version 1.0.13.1

Since you cannot bridge these versions with software, you have two primary options: Hardware Swap

: You can replace your existing 9.1.3 head unit with a newer MediaNav Evolution 2 (ULC4) unit. This is often a "plug and play" physical installation in Renault and Dacia vehicles, though some configuration via Micom Manager

might be needed to align with your car's specific features (like the rearview camera). Aftermarket Firmware

: If you want new features without swapping hardware, some users install third-party "skins" like

to add video players or newer maps, though these still run on the old Windows CE base. : Attempting to force-load a 1.0.x.x file onto a 9.1.3 system will likely brick the device or instructions for installing custom firmware on your 9.1.3 device? Update MediaNav 9.1.3 to Android version 1.0.13.1?

Updating a MediaNav system from version 9.1.3 to 1.0.13.1 is a journey of transition between two entirely different hardware generations. While the screens might look nearly identical, the internal "brains" are worlds apart. The Conflict: Windows vs. Linux

For many Renault and Dacia owners, the dream of "upgrading" is actually a technical impossibility through software alone.

MediaNav Evolution (9.1.3): This is the pinnacle of the first-generation Evolution hardware (MN2). It runs on Windows CE 6.0, an aging operating system with limited processing power and RAM.

MediaNav Evolution 2 (1.0.13.1): Known as the ULC4, this unit runs on a modern Linux-based architecture. It features a faster processor, a more responsive capacitive touchscreen, and—most importantly—native support for Android Auto and Apple CarPlay. It is not possible to upgrade a MediaNav

Because these systems use fundamentally different operating systems and hardware (LAN5200 vs. LAN5800), you cannot simply install the 1.0.13.1 firmware onto a 9.1.3 unit. The Quest for "Modern" Features

If your goal is to get the features found in version 1.0.13.1 (like smartphone mirroring) onto your existing 9.1.3 device, you have two primary paths: 1. The Hardware Swap (The Replacement)

The only way to truly "upgrade" to version 1.0.13.1 is to replace the physical head unit.

Acquisition: Find a salvaged or new MediaNav ULC4 (Linux unit).

Compatibility: Most units are "plug-and-play" in terms of physical dimensions, but you may need a Fakra antenna adapter or modifications to the microphone wiring.

Activation: Once installed, you may need to use diagnostic tools like ddt4all to perform a "Hard Reset" and ensure features like the rear-view camera are active. 2. The Software Workaround (Mediaskin)

For those sticking with their 9.1.3 hardware, the community has developed unofficial "skins" or custom firmware. MediaNav Evolution Update - car multimedia software

Upgrading from MediaNav version 9.1.3 to version 1.0.13.1 is a common question, but it is important to know that these represent two completely different hardware generations. The Critical Difference

Version 9.1.3 (Evolution 1): Runs on Windows CE. This hardware does not support modern features like smartphone mirroring.

Version 1.0.13.1 (Evolution 2/3): Runs on Linux. This newer hardware was designed for smartphone integration, including Apple CarPlay and Android Auto.

Because the underlying operating systems and hardware processors are fundamentally different, you cannot perform a software-only update to move from 9.1.3 to 1.0.13.1. Your Options 1. Hardware Swap (The Only Way to get 1.0.13.1) Step 4: The Update Process

To get version 1.0.13.1, you must physically replace your existing head unit with a newer "MediaNav Evolution 2" (Linux-based) unit.

Compatibility: Physical dimensions are generally identical, but wiring (specifically the radio antenna or camera connections) may require adapters.

Source: Look for units from 2019+ models in salvage yards or through specialist retailers. 2. Maximize Version 9.1.3

If you choose to keep your current hardware, ensure it is fully updated and enhanced:

Official Updates: Use the Renault MediaNav Toolbox or Dacia Toolbox on your PC to get the latest 9.x firmware and map data.

Map Updates: You can update maps to the latest quarters (e.g., 2023/2024) even on version 9.1.3 to keep navigation accurate.

Third-Party Skins: Many users install community-made "skins" (like MediaSkin) onto 9.1.3 to add video players and custom navigation, though this carries a risk of "bricking" the device. 3. Aftermarket Alternatives

If CarPlay/Android Auto is your primary goal, consider a high-quality aftermarket Android head unit. These are often easier to install than sourcing a used OEM Linux unit and offer much higher screen resolution and app support. How to Check Your Current Version Turn on the MediaNav unit. Go to Settings -> System. Select System Version to see your current firmware.

Step 4: The Update Process

  1. The screen will go black for 30 seconds. Do not panic.
  2. A progress bar will appear with the text: "Update in progress. Do not remove USB. Do not turn off ignition."
  3. The system will reboot automatically:
    • First reboot: Radio may play static or silence. Normal.
    • Second reboot: Screen calibration may appear briefly.
    • Third reboot: The home screen will load with the new version.
  4. Wait until the process reaches 100% and the screen returns to the main interface with working buttons.

Safety & Risk Assessment

Before proceeding, understand the risks involved in flashing automotive firmware:

  • Warranty: This process modifies the factory software state. If your vehicle is still under warranty, the dealer may detect the software change and could potentially void claims related to the infotainment system.
  • Power Stability: The update process can take up to 30 minutes. You must ensure your car battery does not die during the process. A voltage drop during a firmware flash can permanently damage the MediaNav unit. It is highly recommended to keep the engine running or use a battery tender.
  • Settings Reset: Updating the firmware will reset all your saved radio stations, Bluetooth pairings, and equalizer settings. Be prepared to re-pair your phone and re-tune your radio.

Part 1: Understanding the Versions – No, You Are Not Downgrading

Before touching a USB stick, you must understand the versioning system.

  • Medianav 9.1.3: This is part of the old generation firmware (often called "Tricolor" or "Color 1"). It is stable but lacks features, has a slower interface, and suffers from Bluetooth connectivity issues with modern smartphones.
  • Medianav 1.0.13.1: This is part of the new generation firmware (often called "Medianav Evolution" or "Black & White/Orange" UI). Despite the 1.0 prefix, this is a major upgrade in terms of architecture. It brings a completely redesigned interface, faster response times, and better hardware management.

Crucial Note: This upgrade is only possible if your hardware supports it. Specifically, this upgrade is intended for Medianav 1.0 hardware units (usually found in vehicles manufactured after 2015 in Europe). If you have an older "Tricolor" unit (with a green/yellow/red screen), do not attempt this – it will brick your system.

How to check your hardware: Look at your system information. If it says RNM – Hardware version 1.0.x.x or RNM – Hardware version 6.0.x.x, you are a candidate. If it says RNM – Hardware version 0.x.x, abort.