Usb Device Id Vid 1e3d Pid 198a Updated !!top!! May 2026

Dealing with "Unknown" USB Devices: A Guide to VID 1E3D & PID 198A

Have you ever plugged in a USB drive only to see the dreaded "Unknown Device" or "Mass Storage Device" with a yellow exclamation mark in your Device Manager? If you've dug into the properties and found

, you are not alone. These specific identifiers are surprisingly common in the world of budget flash drives and "unbranded" storage solutions.

Here is everything you need to know about this device ID and how to get it working again. What is VID 1E3D / PID 198A? Every USB device has a Vendor ID (VID) Product ID (PID) that tells your operating system which drivers to load. Vendor ID (1E3D): This belongs to Chipsbank Microelectronics Co., Ltd.

. They are a major manufacturer of USB controllers used by many third-party brands. Product ID (198A): This generally identifies the device as a ChipsBnk Flash Disk or generic USB Mass Storage Device usb device id vid 1e3d pid 198a updated

You’ll often find this ID in Lenovo-branded USB drives, generic "metal key" drives, and occasionally in fake high-capacity drives (like those 2TB or 16TB drives from discount sites that are actually only 16GB–32GB). How to Update or Fix the Driver

If your computer isn't recognizing the drive, it’s usually a driver or firmware issue. Since this device uses a Chipsbank controller, standard Windows drivers should work, but they sometimes need a nudge. NamingSystem USB VID and PID as a device identifier 15 Feb 2022 —

Security & firmware

  • Unknown USB devices can present security risks (badUSB, malicious firmware). Only install drivers or firmware from trusted sources.
  • If the device is a development board or module, verify official firmware images and checksums before flashing.

2. The Device Has a Yellow Bang (Code 28, Code 43, or Code 10)

Error Code 28 means "drivers not installed." Code 43 means "the device has reported a problem." Code 10 means "device cannot start." In all cases, an updated, digitally signed driver is the primary fix.

Why the "Updated" Driver May Not Exist (And What to Do)

The harsh truth: Chipsea 1E3D PID 198A may be a legacy or counterfeit chip. Many USB vendors switched away from Chipsea after 2018 due to stability issues and lack of signed drivers for Windows 10/11. Dealing with "Unknown" USB Devices: A Guide to

If no updated driver works:

  • Replace the device: A high-quality USB-serial adapter based on FTDI FT232 or genuine Silicon Labs CP2102 costs under $15.
  • Use a Linux virtual machine: The device often works out-of-the-box on Linux (kernel module cdc_acm or ch341). You can pass the USB device to a Linux VM and access it from there.
  • Accept the legacy driver: If the device works with a 2016 driver and you don't have security or performance issues, stop searching for an "updated" version.

How to Remove a Bad Driver Update

If a recent automatic update broke the device:

  1. Open Device Manager.
  2. Right-click the device > Properties > Driver tab.
  3. Click Roll Back Driver (if enabled).
  4. If that fails, click Uninstall Device and check Delete the driver software for this device.
  5. Reboot. Windows will try to reinstall the default driver—block this by using wushowhide.diagcab (Microsoft Show/Hide Updates tool) to hide future updates for this VID/PID.

What to Do After the Update

If the device works normally:

  • No action needed. Windows has successfully updated the driver.

If the device shows 0 bytes, "Please insert disk," or is missing: Unknown USB devices can present security risks (badUSB,

  • The update likely failed or the firmware is corrupt.
  • Solution: Relaunch the specific CBM209X MP Tool (v1.9.3x or newer) and perform a "Normal Flash" or "Erase All + Download."

If you need to revert:

  • Go to Device Manager → Universal Serial Bus devices → Right-click the device → Properties → Driver → Roll Back Driver.

Manually Point to a .inf File

If you have downloaded a driver pack (e.g., from a Chinese OEM website):

  1. Extract the ZIP folder.
  2. In Device Manager, right-click the device > Update driver > Browse my computer.
  3. Click Let me pick from a list > Have Disk.
  4. Browse to the extracted folder containing the .inf file and select it.

Final Verdict: Do You Really Need a Third-Party "Updated" Driver?

No. You do not need any paid driver updater. The safest updated driver for USB device ID VID 1E3D PID 198A comes from one of three free sources:

  1. Microsoft Update Catalog (most current WHQL driver)
  2. Your laptop OEM’s support website (most compatible)
  3. Windows built-in generic USB Video driver (most stable)

If your camera is not working, start with Privacy Settings > Device Manager uninstall/reinstall > Windows Update optional drivers. In 9 out of 10 cases, the “updated” driver is already on your machine – it just needs a forced reinstallation.

Step 3: Use Zadig (Advanced Users Only)

If the device is misclassified or missing a driver, Zadig (an open-source USB driver installer) can force-install a generic WinUSB, libusb, or Serial driver.

  1. Download Zadig from its official website.
  2. From the dropdown, select USB\VID_1E3D&PID_198A.
  3. Choose either WinUSB (for generic access) or USB Serial (CDC) if it's a COM port device.
  4. Click Install Driver.