Vcds Kolimer Failed 2 New !!exclusive!!

This document is structured for a technician or advanced user troubleshooting a VAG (VW/Audi/Seat/Skoda) vehicle using a non-genuine interface.

Step 6: Check Folder Path and Naming

Avoid spaces or special characters:

Wrong: C:\Users\Me\Desktop\VCDS crack new\kolimer.exe
Right: C:\VCDS\kolimer.exe Keep VCDS and Kolimer in the same folder.

What Does “Failed 2 New” Mean?

The string “failed 2 new” likely refers to a specific error condition inside Kolimer’s loader: vcds kolimer failed 2 new

“Failed” = The crack/loader could not complete the bypass.
“2” = Possibly a step number or second-stage failure.
“New” = Indicates trouble initializing a “new” or updated protection mechanism.

Combined, the error suggests that the Kolimer loader tried to patch, emulate, or bypass VCDS’s anti-tamper checks, but a second-step verification (something new in your VCDS version or system) stopped it.

Unofficial Workarounds (Not Recommended):

Try VCDS Loader v4.5 or VAGCOM Helper instead of Kolimer.
Use older VCDS version like 11.11 (unsafe for modern cars).
Install Windows XP in a virtual machine.

The "Silicon Labs" CP2102 Alternative

Some newer clone cables use Silicon Labs CP2102 chips instead of FTDI. If you have a "failed 2 new" error with an FTDI driver, your cable might actually be a CP2102 variant. This document is structured for a technician or

Download and install Silicon Labs CP210x Universal Windows Driver.
In Device Manager, manually assign the driver.
The Kolimer loader works with both, but you must tell the loader which chip you have (some versions have a config file named FTDI_or_Silabs.ini). Set it correctly.

6. Recommended Actions

Do not attempt to flash new firmware – this will permanently brick the clone interface.
Replace with a genuine Ross-Tech HEX-V2 (approx. $199–$299). This is the only reliable solution for vehicles from 2016 onward.
If budget is constrained, use an older vehicle (pre-2014) and an older VCDS version (e.g., 12.12) – but expect further failures as modules update.

What is VCDS?

VCDS (VAG-COM Diagnostic System) is a powerful Windows-based diagnostic software developed by Ross-Tech. It allows in-depth scanning, coding, adaptation, and troubleshooting of VAG group vehicles.

1. The Most Likely Culprit: "Communication Failed"

In the VCDS interface, if the software cannot talk to a specific control module, it often displays a message in German or a translation error. Step 6: Check Folder Path and Naming Avoid

"Kolimer" is likely a typo for "Kommunikation" (Communication) or "Kilometer" (Mileage).
"Failed" is self-explanatory.
"2 New" likely refers to a status code or a prompt that "2 new" fault codes were found, or it is a fragmented translation of "to new" (referring to installing a new part).

What this means: Your diagnostic cable is talking to the car's main gateway, but it cannot reach a specific module (like the Engine, ABS, or Transmission).