The Samsung WIS09ABGN LinkStick is a dual-band wireless USB 2.0 adapter originally designed for 2009–2011 Samsung Smart TVs and Blu-ray players. While it was intended as a proprietary TV accessory, many users have discovered that its underlying hardware—the Ralink RT2850/RT2870 chipset—makes it a highly capable Wi-Fi adapter for modern PCs.
Getting the WIS09ABGN driver to work on Windows 10 requires a bit of manual effort because Samsung does not provide official PC drivers for this device. How to Install WIS09ABGN Driver on Windows 10
Because Windows 10 may not automatically recognize the LinkStick as a network adapter, you must "force" it to use compatible drivers. The most reliable method is to use the built-in Windows driver for the Linksys WUSB600N, which shares the same internal chipset.
Plug in the Adapter: Insert the Samsung LinkStick into a USB 2.0 or 3.0 port on your PC.
Open Device Manager: Right-click the Start button and select Device Manager.
Identify the Device: Look for an item under "Other devices" or "Network adapters" labeled 802.11 n WLAN or similar with a yellow exclamation mark.
Update Driver: Right-click the device and select Update driver.
Manual Selection: Choose Browse my computer for driver software, then select Let me pick from a list of device drivers on my computer.
Find the Manufacturer: Scroll down the list of device types and select Network adapters. Select Compatible Driver: In the Manufacturer column, select Linksys.
In the Model column, look for Linksys WUSB600N Wireless-N USB Adapter with Dual-Band ver. 2.
Note: If you don't see it, uncheck "Show compatible hardware" to see the full list.
Confirm Installation: Windows will warn you that the driver might not be compatible. Click Yes to proceed.
Restart: Once the installation is complete, your adapter should now appear as a functional Linksys WUSB600N in your network settings. Alternative Driver Sources wis09abgn driver windows 10
If the built-in Windows drivers do not work, you can download third-party driver packages that specifically target the Ralink chipset used in the WIS09ABGN. Go to product viewer dialog for this item.
Wis09 Abgn Wireless Linkstick Wis09 Abgn2 Usb Lan Adapter For Samsung 2009 2010 & 2011 Blu Ray Players
Samsung WIS09ABGN LinkStick is a wireless USB adapter originally designed for 2009–2011 Samsung Smart TVs and Blu-ray players. To use it on Windows 10
, you must manually install drivers because it is a proprietary device that Windows may not recognize automatically. Recommended Driver Solution The WIS09ABGN uses the Ralink RT2850 chipset
. You can often get it working by using compatible drivers for the Linksys WUSB600N v2 , which uses the same hardware. Step-by-Step Installation for Windows 10 Download Drivers : Locate and download the Linksys WUSB600N v2
drivers for Windows 7 or Vista (the 64-bit version is required for 64-bit Windows 10). Extract Files : Unzip the driver folder to your desktop. Open Device Manager : Right-click the button and select Device Manager Identify Device : Look for 802.11 n WLAN (often under "Other devices"). Update Driver Right-click the device and select Update Driver "Browse my computer for driver software" "Let me pick from a list of device drivers on my computer" and browse to the extracted folder on your desktop. Select the INF File
: Open the folder matching your system (32-bit or 64-bit) and select the netr28u.inf Confirm Device
"Linksys WUSB600N Wireless-N USB Adapter with Dual-Band ver. 2" from the list. Ignore Warning : Windows may warn about compatibility; click to proceed with the installation. Troubleshooting Tips
If drivers for Wis09abgn don't work, retrieve the actual hardware ID. This guarantees you get the right driver.
USB\VID_148F&PID_3070 (Ralink RT3070)USB\VID_148F&PID_5370 (Ralink RT5370)USB\VID_148F&PID_3070).www.lcsc.com or driverpack.io). Download the driver specifically matched to that VID/PID.Sometimes the driver is present but corrupted. Here’s how to refresh it:
If it fails, repeat the process but instead of restarting, use Method 2 above to manually install after uninstallation.
Cause: Driver conflict or resource allocation issue. The Samsung WIS09ABGN LinkStick is a dual-band wireless
Fix:
If you’ve recently upgraded to Windows 10 or performed a clean installation, only to find your Wi-Fi has vanished, you may have stumbled upon a cryptic device in Device Manager labeled wis09abgn. This identifier refers to a common but often misidentified wireless network adapter. Getting the correct driver for it can be frustrating, but this guide will walk you through everything you need to know.
If the driver installer says “device not found,” you can manually add your hardware ID.
netr28x.inf (for Ralink).[Ralink.NT.6.1] (or similar).%RT3090.DeviceDesc% = RT3090.ndi, PCI\VEN_1814&DEV_3090&SUBSYS_30901814wis09abgn → Properties → Details → Hardware Ids).Replace the dongle — a modern USB Wi-Fi adapter with native Windows 10 support (e.g., AC600/AC1200 based on Realtek RTL8811CU/RTL8821CU) costs ~$10–15 and saves hours of driver headaches.
If you share the USB vendor/device ID (from Device Manager → Details → Hardware Ids), I can confirm the exact chipset and driver version you need.
The Samsung WIS09ABGN LinkStick is an older dual-band wireless USB adapter primarily designed for Samsung Smart TVs and Blu-ray players. While it was not originally marketed for PCs, it is widely considered a "hidden gem" by tech enthusiasts because it uses the high-quality Ralink RT2850 chipset, which is highly compatible with Windows 10 through manual workarounds. Performance Review
Dual-Band Support: Unlike many budget adapters of its era, it supports both 2.4GHz and 5GHz frequencies.
Legacy Reliability: Users report it can outperform modern budget adapters in short-range environments, though it may struggle with signal strength in very large homes compared to newer Wi-Fi 6 hardware.
Plug-and-Play (TVs): For Samsung TVs (2009–2012 models like the B, C, D, and E series), it requires no setup. Windows 10 Compatibility & Driver Installation
The WIS09ABGN does not have official Windows 10 drivers from Samsung. However, it is functionally identical to the Linksys WUSB600N v2, and those drivers can be used to make it work on Windows 10/11. Manual Installation Guide for Windows 10
If Windows does not automatically recognize the device, follow these steps to use the Linksys alternative:
Download Drivers: Locate drivers for the Linksys WUSB600N v2 (even Vista/Windows 7 versions work). In Device Manager , right-click the problem device
Open Device Manager: Right-click the Start button and select Device Manager.
Find the Device: Look for "802.11 n WLAN" under Other devices. Update Driver: Right-click the device and select Update driver. Choose "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer". Choose the Model:
Click Have Disk and browse to your downloaded driver folder.
From the list, select "Linksys WUSB600N Wireless-N USB Adapter with Dual-Band ver. 2".
Ignore any compatibility warnings; users confirm this "cross-flashing" works reliably on Windows 10 as recently as 2024. Known Limitations
Driver Scarcity: Samsung’s official support site for these drivers is largely offline, making third-party archives or Linksys drivers necessary.
Bulkiness: The physical size of the stick may block adjacent USB ports; the original package often included a right-angle adapter to mitigate this.
To use the Samsung WIS09ABGN LinkStick (802.11a/b/g/n Wireless USB Adapter) on Windows 10, you must manually install compatible drivers, as Samsung originally designed this device for 2009–2011 TVs and Blu-ray players. Recommended Driver for Windows 10 Ralink RT2850/RT3572
chipset. While Samsung does not provide a dedicated Windows 10 executable, the following drivers from DriverScape MediaTek (Ralink) are reported to work: Ralink RT3572 802.11a/b/g/n Wireless LAN USB Device (Version 5.01.09.0000 or newer). Linksys WUSB600N v2
drivers are also functionally compatible with this hardware. Step-by-Step Manual Installation
Since Windows 10 may not recognize the adapter automatically, follow these steps to force the driver installation: