The WS-1958BT is a portable, car-shaped Bluetooth speaker (often styled as a classic taxi or Beetle) designed by WSTER [2]. It combines a novelty aesthetic with multi-functional audio features like FM radio and hands-free calling [1, 2]. Core Specifications
Audio Output: Typically dual 3W or 5W speakers (Total 6W-10W) [1, 3, 7].
Connectivity: Bluetooth 5.0, USB port, TF (Micro SD) card slot, and 3.5mm AUX input [1, 2].
Battery: Built-in rechargeable 18650 lithium battery (1200mAh to 1800mAh), providing roughly 2–3 hours of playback [1, 2, 6]. Radio: FM frequency range of 87.5–108 MHz [3].
Special Features: LED light effects, hands-free telephone support, and even a "Bluetooth selfie" remote shutter mode [1, 2]. Operation Guide
Based on standard WSTER car-model interfaces, here is how to operate the device:
Power On/Off: Use the sliding switch (usually located on the rear or bottom of the "car") [3]. Bluetooth Pairing:
Turn on the speaker; it usually defaults to Bluetooth mode with a voice prompt.
Enable Bluetooth on your device and select "WS-1958BT" to pair [14]. Playback Controls:
Next/Volume +: Short press to skip to the next track; long press to increase volume [3].
Prev/Volume -: Short press for the previous track; long press to decrease volume [3].
Play/Pause: Press once to play or pause. In FM mode, long press to auto-scan and save stations [3].
Switching Modes: Use the "M" or Mode button (if available) to toggle between Bluetooth, FM Radio, USB, and SD card [2]. Port & Cable Layout
Most models use a "2-in-1" cable system where the charging cable also acts as the FM antenna [2]. Charging: Use the DC-5V port (Micro-USB).
Media Slots: Insert a USB flash drive or TF card into the respective slots at the rear for automatic playback of MP3 files [3]. Troubleshooting Tips
Weak Radio Signal: Plug in the USB charging cable to act as an external antenna for better FM reception [2].
Pairing Issues: If the device won't connect, ensure it is not already linked to another nearby phone. You can usually reset the pairing by turning the speaker off and back on [28]. ws-1958bt music car speaker manual
Long-press the Mode button (M) or toggle the power switch, usually located on the "trunk" or bottom of the car. Bluetooth Mode:
Switch to Bluetooth mode. Open your phone's Bluetooth, search for "WS-1958BT", and pair. It supports hands-free calling.
Switch to FM mode. Short-press the Play/Pause button to search for stations. Mode Switching:
Short-press the "M" button to toggle between Bluetooth, FM radio, TF card, and USB input. Volume/Track Control:
Long-press volume buttons to change volume; short-press to skip to the next or previous track. Selfie Mode:
Some versions support Bluetooth selfie, activated via button combination. 2. Charging and Battery
Connect the USB power cable (usually included) to a 5V charging source. LED Indicator: A charge indicator light typically turns on while charging. Play Time: Approximately 2–3 hours depending on volume. Battery Capacity: Built-in 18650 battery (often 1200mAh to 1800mAh). 3. Specifications Output Power: 3 Watts (6W total) or 2 Bluetooth Version: Frequency Range: 100-18KHz. Connectivity: Bluetooth, TF Card, USB Drive, AUX (audio line-in). Horn/Driver: 2 x 52mm Drivers (External Magnetic). 4. Troubleshooting Speaker does not turn on: Charge the device for at least 2 hours. Bluetooth not connecting:
Turn the speaker off and on again, ensure no other device is connected. FM radio reception is poor: Plug in the AUX/USB cable, as it acts as an antenna.
Note: This information is based on supplier datasheets for the EONKO/WSTER WS-1958BT Car Shape Speaker. WS-1958BT - Car MODEL SPEAKER
If you’ve recently purchased a WS-1958BT Music Car Speaker or are struggling to get it working correctly, you’ve come to the right place. While the original printed manual is often lost or hard to read, this comprehensive guide serves as your complete digital ws-1958bt music car speaker manual. We will cover everything from unboxing and initial installation to advanced Bluetooth pairing, LED controls, and solving common technical issues.
The WS-1958BT is a versatile, budget-friendly audio solution for any vehicle, provided you understand its quirks. Unlike high-end car stereo systems, this portable speaker trades deep bass and multi-speaker configurations for simplicity, LED flair, and karaoke functionality.
With this comprehensive manual replacement, you should now be able to pair your phone, manage LED effects, troubleshoot power issues, and even use the microphone for impromptu carpool karaoke. Keep this guide saved, and consider leaving a photo of your installed unit in a review to help other users.
Remember: When in doubt, perform a hard reset (pinhole button), check your 12V fuse, and always drive safely with the volume at a level where you can hear emergency vehicles.
Keywords addressed: ws-1958bt music car speaker manual, WS-1958BT setup, Bluetooth pairing, troubleshooting, 12V car speaker, microphone echo adjustment, FM radio presets, USB playback, factory reset.
The WS-1958BT music car speaker is a portable Bluetooth device designed with a unique "taxi car" or classic car aesthetic. This manual covers everything from initial setup and pairing to advanced features like FM radio and hands-free calling. 1. Key Features and Technical Specifications Before diving into the operations, Audio Output: 6W total (2 x 3W stereo speakers). Battery: 1800mAh internal rechargeable battery. Frequency Range: 100Hz – 18KHz.
Playback Time: Approximately 90 to 130 minutes on a full charge. The WS-1958BT is a portable, car-shaped Bluetooth speaker
Functions: Bluetooth 5.0, FM Radio, USB Drive support, TF (MicroSD) Card reader, AUX input, and a selfie shutter mode. 2. Getting Started: Power and Charging
To ensure optimal battery health, charge the device fully before its first use.
Charging: Connect the provided USB cable to the DC 5V port on the speaker and a standard USB power adapter.
Indicators: An LED indicator will light up during charging. It typically takes 2–3 hours to reach a full charge.
Power On/Off: Use the main power switch (often labeled "M" or located on the back/bottom) to turn the device on. You will hear an audible prompt or see the LED screen light up. 3. Bluetooth Pairing Instructions
The WS-1958BT uses Bluetooth 5.0 for a stable connection up to 10 meters.
Enter Pairing Mode: Turn the speaker on. It will automatically default to Bluetooth mode and a flashing light or voice prompt will indicate it is ready to pair.
Connect Device: Open the Bluetooth settings on your smartphone or tablet and scan for new devices.
Select "WS-1958BT": Choose the speaker's name from the list. Once connected, the LED will stop flashing and you will hear a confirmation tone. 4. Playback Modes and Controls
The speaker supports multiple audio sources, which can be toggled using the Mode (M) button: WSTER WS1958BT Portable Bluetooth Car Speaker
3. Bluetooth Pairing * Turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.
WSTER WS-1958BT is a novelty car-shaped Bluetooth speaker often used as a portable audio player or home decoration. Users generally review it as a fun, visually appealing gadget with "good sound" for its size, particularly highlighting the working top lights and opening trunk that houses the USB and card slots. AliExpress Manual & Operational Guide
While a physical user manual is typically included as an accessory, the core operations are intuitive:
: Power on the device and enable Bluetooth on your phone. Pair with the device name (often " Mode Switching
button to toggle between Bluetooth, FM Radio, and USB/TF card modes. Button Controls Short Press : Skip to next/previous song. Long Press : Increase or decrease volume. Play/Pause : Used for music playback and answering calls. Special Features
: Some versions support a "selfie" mode where the speaker buttons act as a remote shutter for your phone's camera. LED Indicators : Pairing mode. Solid White : Connected. Blinking Red : Low battery. Technical Specifications Output Power 3W x 2 (Stereo) Battery Capacity 1800mAh (built-in 18650) 90–130 minutes (varies by volume) Charging Time 2–3 hours via DC 5V Connectivity Bluetooth 5.0, USB, TF Card, 3.5mm Aux-in Frequency Range 100Hz–18kHz User Feedback Highlights Switch to FM mode
: Reviewers appreciate the "Taxi" or classic car styling and the variety of available colors (Red, Green, White, Pink, Yellow, Black). Versatility
: It is noted for its ability to play music via USB and TF cards in addition to Bluetooth. Sound Quality
: Described as having "surprisingly rich sound" and "super bass" for its compact size.
: Most models are made of plastic and include functional rolling wheels. or are you trying to find a place to purchase WSTER Manuals & User Guides
M/ Hold:ON/OFF. Press:mode switching. The Key Operation " M/" Short press: Wireless Manuals.plus WS-1958BT MUSIC CAR SPEAKER 22 Nov 2020 —
WS-1958BT Music Car Speaker which features an MP3 player, It is available in red, green, white, pink, yellow, and black colors.
The Go to product viewer dialog for this item. is a portable car-shaped Bluetooth speaker designed with a retro aesthetic (often resembling a Beetle or Taxi model) that combines novelty decor with modern audio features. 1. Key Features & Controls
This device operates via several physical keys typically located on the top or rear of the vehicle body:
Mode Selection (M): Cycles through Bluetooth, FM Radio, USB, and TF/MicroSD modes.
Media Playback: Includes dedicated buttons for Play/Pause and Next/Previous track.
Volume Control: Long-pressing the "Next" or "Previous" buttons generally adjusts the volume.
Extra Functions: Supports hands-free calling with a built-in microphone, a Bluetooth "selfie" remote function for your phone, and the ability to record or delete audio. 2. Technical Specifications Bluetooth Version 5.0 (supports music, calls, and selfie) Speaker Output
Dual 3W or 5W stereo drivers (depending on specific model variant) Frequency Response 100Hz – 18KHz Battery Capacity 1800mAh (built-in 18650 rechargeable battery) Charge Voltage 5V (USB standard) Inputs
TF/MicroSD Card, USB Flash Drive, 3.5mm AUX, DC 5V (charging) 3. Operational Guide WS-1958BT - Car MODEL SPEAKER
**Problem: The unit will not pair