Canon Service - Resetter Tool

The Canon Service Tool is a professional utility used to maintain and diagnose Canon Pixma printers. It is primarily used to resolve the 5B00 or 1700 error, which indicates that the waste ink absorber is full. 🛠️ When to Use the Resetter Tool

Printers track how much ink is used during cleaning cycles. Once a certain limit is reached, the printer locks itself to prevent ink from leaking onto your desk. Error 5B00: The "Waste Ink Counter" is at 100% capacity.

Error 1700: The absorber is almost full and will soon require a reset. 📝 How to Reset Your Canon Printer

To use the tool, your printer must be in Service Mode. While steps vary by model, the most common method for Pixma G and MG series is:

Was the canon service tool taken down from the net? : r/printers

Technical Overview: Canon Service Tool and Ink Counter Resets

The Canon Service Tool is a specialized maintenance utility used to manage internal printer settings, most notably for resetting the Waste Ink Absorber Counter (Error 5B00 or P07). This "paper" outlines the function, requirements, and procedures for using these tools to extend the lifespan of a Canon PIXMA or imageCLASS printer. 1. The Purpose of Service Tools

Canon printers include a "waste ink absorber"—a series of felt pads that collect excess ink during print head cleanings. To prevent ink overflow, the printer uses a digital counter to estimate when these pads are full. Once the limit is reached, the printer locks itself and displays an error code (often 5B00, 5B01, or P07). A Service Tool allows a technician or user to digitally zero this counter after the physical pads have been cleaned or replaced. 2. Versions and Compatibility canon service resetter tool

Service Tools are released in versions (e.g., V3400, V3600, V5103) corresponding to different printer generations.

Legacy Models (e.g., iP, MG series): Often require older versions like V3400.

Modern G-Series (MegaTank): May require newer versions or specific button-sequence "hard resets".

Standard Maintenance: For routine tasks (no errors), users should use the Canon IJ Printer Assistant Tool found in the standard driver software. 3. Entering "Service Mode"

The Service Tool software cannot communicate with a printer in its normal state. The printer must first be placed into Service Mode using a physical button sequence:

To use the Canon Service Tool (software used to reset waste ink counters and fix errors like 5B00), you must first manually put your printer into Service Mode. Without this step, the software will not recognize the device. 1. Enter Service Mode (Button Sequence)

This sequence works for most PIXMA G, MG, and MX series printers: The Canon Service Tool is a professional utility

Turn Off the printer but leave it plugged in. Connect it to your PC via USB cable (wireless resets are not supported). Press and hold the Stop/Resume button (red triangle icon). While holding Stop, press and hold the Power button. Keep holding Power, but release the Stop button.

While still holding Power, press the Stop button 5 times (for MG series, try 6 times).

Release both buttons. The power light should blink and then stay steady green. Your printer is now in Service Mode. 2. Using the Service Tool Software

Once in Service Mode, you can use a version of the tool compatible with your printer (e.g., V3400 or V5105).

Identify Port: Open the tool and select the correct USB Port from the dropdown menu.

Clear Waste Ink: Look for the "Ink Absorber Counter" or "Clear Waste Ink Counter" section.

Reset: Select "Main" (or "All") and click "SET" or "Execute". A "A function was finished" popup should appear. Keyloggers Ransomware (e

Exit: Turn the printer off and back on to exit Service Mode. 3. Safety & Troubleshooting Canon Service Tool instructions !... - PrinterKnowledge

Here’s a draft for content about a “Canon service resetter tool,” written for an informational or support-style page (e.g., a blog, forum, or FAQ).

3. Operation of the Unauthorized Resetter Tool

4.3 Malware Distribution

Downloaded resetters are often bundled with:

• Keyloggers
• Ransomware (e.g., STOP/DJVU variants)
• Cryptocurrency miners

Example: A 2022 analysis of ServiceTool_V2000.exe revealed a hidden DLL sideloading attack.

1. Pay Canon for Service

Cost: $70–$150. Canon will replace the waste pad, reset the counter, and give you a 90-day warranty. For expensive printers (Canon Pro-1000, ImagePrograf), this is the wise choice.

4.4 Legal and Warranty Issues

• Using a non-authorized tool voids the printer’s warranty.
• In some jurisdictions (e.g., Germany, USA with DMCA), circumventing service-mode locks may violate copyright or anti-circumvention laws.

9. Conclusion

The Canon Service Resetter Tool is a double-edged sword: it empowers users to bypass artificial lockouts but risks physical damage, security compromise, and legal liability. For technically inclined users who combine it with pad maintenance, it can extend printer life. For casual users, the safest path remains professional service or replacement.

Manufacturers should consider designing user-resettable counters with visible pad status, reducing demand for dangerous reverse-engineered tools.