Skip to Content
Call Us Today!
Top

How To Install Mtk Driver Mediatek Preloader Usb Vcom

Requirements

Conclusion

Installing the MediaTek PreLoader USB VCOM driver is a rite of passage for anyone who mods or repairs MediaTek phones. While Windows’ security features make it tricky, the process is straightforward once you know the two golden rules:

  1. Disable driver signature enforcement before installation.
  2. Act fast (or pre-install via legacy hardware) because the PreLoader window is short.

With this driver correctly installed, you unlock the full potential of SP Flash Tool, Miracle Box, and countless other flashing utilities. Whether you're unbricking a device, removing FRP, or upgrading firmware, the VCOM driver is your essential bridge between PC and phone.

Final checklist after reading this guide:

Now go ahead and install your MTK driver with confidence!

Word count: ~1,450. For more detailed device-specific variants, check your phone’s XDA-Developers forum thread.

The digital air in the workshop was thick with the scent of ozone and frustration. Silas stared at his bricked smartphone—a silent slab of glass and metal that refused to breathe. To revive it, he needed to perform the ultimate digital handshake: installing the MTK MediaTek Preloader USB VCOM driver. Chapter 1: The Gathering of Tools

Silas began by clearing his workspace. He knew that modern Windows guards were wary of outsiders, so his first step was to lower the drawbridge. He ventured into Settings > Update & Security > Recovery. Under "Advanced startup," he clicked Restart now.

Upon the blue screen of rebirth, he chose Troubleshoot > Advanced options > Startup Settings > Restart.

With a firm press of the ‘7’ key, he disabled Driver Signature Enforcement. Only then would the system accept the ancient MTK scripts. Chapter 2: The Summoning

With the gates open, Silas downloaded the sacred driver package. He extracted the files, revealing the .inf scrolls that held the power of communication.

He right-clicked the Start icon and summoned the Device Manager.

He highlighted his computer’s name at the very top, went to Action, and selected Add legacy hardware.

The wizard appeared. Silas told it he would "Install the hardware that I manually select from a list." He chose Show All Devices, then clicked Have Disk.

He navigated to his extracted folder, selecting the file named usb_driver_MT65xx_Android_ZTE.inf (or its equivalent). Chapter 3: The Handshake

A list of spirits appeared. Silas chose the one true guide: MediaTek Preloader USB VCOM Port. how to install mtk driver mediatek preloader usb vcom

Windows warned him of the danger, but Silas clicked Yes. The progress bar surged, and the driver settled into the system’s memory. But the ritual wasn't finished. The device manager showed an error—a yellow triangle. This was normal; the Preloader is a ghost that only appears for a few seconds during a cold boot. Chapter 4: The Resurrection

Silas picked up the bricked phone. He opened his flashing tool, loaded the firmware, and clicked Download.

With the phone completely powered off, he connected the USB cable. For a heartbeat, nothing happened. Then, the Device Manager flickered. The yellow triangle vanished, replaced by a solid, active COM Port.

The progress bar in his flashing tool turned from red to yellow, then a steady, pulsing purple. The handshake was complete. Data flowed like lifeblood back into the device.

Minutes later, the phone vibrated. The screen glowed with the manufacturer’s logo. Silas leaned back, the "OK" circle gleaming green on his monitor. The MTK Preloader had done its job, and the silent slab was a phone once more. AI responses may include mistakes. Learn more

Installing MTK Driver: A Step-by-Step Guide to Mediatek Preloader USB VCOM

Introduction

Mediatek (MTK) is a popular chipset used in many Android devices. When it comes to flashing firmware, unlocking bootloaders, or performing other low-level operations, a proper driver installation is crucial. In this paper, we will focus on installing the Mediatek Preloader USB VCOM driver, also known as the MTK driver.

What is Mediatek Preloader USB VCOM?

The Mediatek Preloader USB VCOM driver is a communication interface that allows your computer to recognize and interact with Mediatek-based devices. The Preloader is a small program that runs on the device before the operating system loads, and it plays a vital role in the flashing process. The USB VCOM (Virtual COM Port) driver enables communication between your computer and the device over USB.

Why is the MTK Driver Necessary?

Without the MTK driver, your computer will not be able to detect your Mediatek-based device when performing low-level operations. This driver is essential for:

  1. Flashing firmware: The MTK driver enables SP Flash Tool, a popular tool for flashing firmware on Mediatek devices.
  2. Unlocking bootloaders: The driver allows tools like Fastboot to communicate with the device.
  3. Performing device diagnostics: The MTK driver facilitates communication between the device and the computer for diagnostic purposes.

Step-by-Step Installation Guide

Installing the Mediatek Preloader USB VCOM driver is relatively straightforward. Follow these steps: Requirements

For Windows 10 and later:

  1. Download the driver: Obtain the Mediatek Preloader USB VCOM driver from a reliable source, such as the official Mediatek website or a reputable Android development forum.
  2. Extract the driver: Unzip the downloaded file to a folder on your computer.
  3. Connect your device: Connect your Mediatek-based device to your computer using a USB cable.
  4. Open Device Manager: Press the Windows key + X and select Device Manager.
  5. Locate the device: In Device Manager, look for your device under "Other devices" or "Unknown devices."
  6. Update driver: Right-click on the device and select "Update driver."
  7. Browse for driver: Choose "Browse my computer for driver software" and navigate to the extracted driver folder.
  8. Install driver: Follow the prompts to install the driver.

For Windows 7 and 8:

  1. Download the driver: Obtain the Mediatek Preloader USB VCOM driver from a reliable source.
  2. Extract the driver: Unzip the downloaded file to a folder on your computer.
  3. Connect your device: Connect your Mediatek-based device to your computer using a USB cable.
  4. Open Device Manager: Press the Windows key + R, type devmgmt.msc, and press Enter.
  5. Locate the device: In Device Manager, look for your device under "Other devices" or "Unknown devices."
  6. Update driver: Right-click on the device and select "Update driver."
  7. Browse for driver: Choose "Browse my computer for driver software" and navigate to the extracted driver folder.
  8. Install driver: Follow the prompts to install the driver.

Troubleshooting

If you encounter issues during driver installation, try:

Conclusion

In this paper, we have discussed the importance of installing the Mediatek Preloader USB VCOM driver for Mediatek-based devices. By following the step-by-step guide, you should be able to successfully install the driver on your Windows computer. If you encounter any issues, refer to the troubleshooting section or seek assistance from online communities or Mediatek support resources.

References

Appendix

By following this guide, you should be able to install the Mediatek Preloader USB VCOM driver and perform low-level operations on your Mediatek-based device.

Installing the MediaTek (MTK) Preloader USB VCOM driver is a multi-step process that often requires disabling Windows security features because the drivers are frequently unsigned. This driver is essential for tools like SP Flash Tool to communicate with your device's bootloader. 1. Preparation: Disable Driver Signature Enforcement

Windows usually blocks unsigned drivers. You must disable this check to install the VCOM driver successfully. Driver Easy Update & Security Advanced startup Restart now Troubleshoot Advanced options Startup Settings After the reboot, press on your keyboard to select "Disable driver signature enforcement" 2. Manual Driver Installation

Since these drivers often don't have an automatic installer, you must add them as "Legacy Hardware".

Chapter 5: The Legacy Dance

He knew the trick. The device had appeared and disappeared, but it left a trace.

In Device Manager, he clicked the "Action" menu at the top and selected "Add legacy hardware." A computer running Windows (Windows 7, 8, 8

A wizard popped up.

  1. Next.
  2. "Install the hardware that I manually select from a list (Advanced)."
  3. Next.
  4. He scrolled down to "Ports (COM & LPT)" and selected it.
  5. On the next screen, he clicked "Have Disk..."

He browsed to the folder on his desktop where he extracted the drivers earlier. He pointed to the usb2ser_Win764 subfolder (since he was on a modern 64-bit system).

The list populated. He saw "MediaTek PreLoader USB VCOM Port."

He selected it and hit Next. A warning flashed: "Windows can't verify the publisher of this driver software."

Elias didn't hesitate. He clicked "Install this driver software anyway."

The progress bar filled green. "The hardware is now successfully installed."

Epilogue

Elias opened the SP Flash Tool. He loaded the scatter file (the map of the phone's memory), selected the "Download Only" option to replace the corrupted partition, and clicked the Download button.

He plugged the phone in one last time.

The tool recognized the COM port. The bottom bar turned yellow, then purple. Download Complete.

The phone vibrated. The screen flickered to life with the manufacturer's logo. The patient was breathing again.

Elias leaned back in his chair. The installation of the driver wasn't just a technical step; it was the difference between a door slammed shut and a key turned in the lock. The MediaTek Preloader driver was that key.

These drivers are essential for flashing firmware (using tools like SP Flash Tool), unlocking bootloaders, or unbricking MTK devices (phones with chips like Helio, Dimensity, or MT67xx).

Step 1: Prepare Device

5. Verify Installation

💡 If it disappears after 5 seconds – that’s normal. It only appears while the PreLoader is active.