Hx8872-c Datasheet ^new^ Instant

is a high-precision LCD controller and timing control integrated circuit (IC) manufactured by Himax Technologies

. It is primarily designed for high-quality image and video processing in electronic devices and display systems. WIN SOURCE Technical Specifications Based on available technical references from , the key operating parameters include: Power Supply ( cap V sub cap D cap D end-sub 2.0V to 5.5V (typically 3.3V). Operating Frequency: Up to 24 MHz. Current Consumption: Active Mode: 10 to 20 mA. Standby Mode: 1.0 to 2.0 Thermal Protection: Automatic shutdown if temperatures exceed 150 raised to the composed with power C Package Type:

Compact QFN package, ideal for space-constrained applications. AliExpress Application Details

A typical circuit configuration for the HX8872-C involves several critical components for stability: Microcontroller/Processor: Used to send display data to the IC. Timing Control:

Often requires an external crystal oscillator or clock source for optimal synchronization. Voltage Regulation: Built-in mechanisms maintain stable output ( cap V sub cap O cap U cap T end-sub ) with typical load regulation between 0.05% and 0.1%.

The Himax HX8872-C is a high-performance Timing Controller (T-CON) or gate driver integrated circuit, primarily designed for managing TFT-LCD display panels. It is commonly used in consumer electronics like high-definition televisions, tablets, and smartphones to ensure high-quality image and video processing. Key Specifications Manufacturer: Himax Technologies, Inc.

Resolution Support: Optimised for HD displays with a typical resolution of 1366 x 768. Interface: Supports Serial Peripheral Interface (SPI). hx8872-c datasheet

Package Type: Available in TQFP-64 (Thin Quad Flat Package) or COG (Chip on Glass) formats.

Operating Voltage: Typically operates at 3.3V (range of 2.3V to 3.6V). Channel Count: Features 240 channels for display driving. Clock Frequency: Supports frequencies up to 18 MHz. Technical Features

Enhanced Image Quality: Includes built-in shift registers and level shifters to maintain signal integrity.

Performance Features: Supports CABC (Content Adaptive Brightness Control) and Over-drive technology to reduce motion blur.

Efficiency: Designed for low power consumption, typically around 2.0 mW @ 3V during operation.

Temperature Range: Industrial-grade durability with an operating range of -20°C to 85°C. Typical Applications is a high-precision LCD controller and timing control

Consumer Displays: Primary component for HD LCD and LED television panels.

Mobile Devices: Integrated into smartphones and tablets requiring high-density display control.

Automotive: Utilized in car navigation and audio-visual systems.

Maintenance: Frequently used as a replacement part for upgrading older display systems with better timing control.

For detailed procurement or circuit design, you can find the technical HX8872-C Datasheet PDF or check stock availability at retailers like WIN SOURCE and Utsource.

Do you need specific pinout diagrams or application circuit examples for this controller? HX8872-C HIMAX Интегральные схемы (ИС) Supply Voltage (VCI): -0

Производитель : Himax Technologies, Inc. Упаковка/Ящик : TQFP-64. категорий продукта : Интегральные схемы (ИС). Datasheet: HX8872- www.jotrin.ru

HX8872-C HIMAX Integrated Circuits (ICs) - Jotrin Electronics

2.2 Absolute Maximum Ratings

Exceeding these values (from the hx8872-c datasheet) will destroy the IC:

Supply Voltage (VCI): -0.3V to +4.6V
Logic Input Voltage: -0.3V to VCI +0.3V
Operating Temperature: -40°C to +85°C (industrial grade) or -20°C to +70°C (commercial)
Storage Temperature: -55°C to +125°C

PCB layout recommendations

Place decoupling caps within 1–2 mm of VCC pin.
Use a solid ground plane; stitch grounds with multiple vias.
Keep RF traces short; maintain controlled 50 Ω impedance for RF lines.
Isolate analog/RF section from noisy digital traces and switching regulators.
Follow manufacturer recommended keepout areas around RF pins and antenna.

6. Typical Commands (shortlist)

| Command | Hex | Function | |---------|-----|----------| | SWRESET | 0x01 | Software reset | | SLPOUT | 0x11 | Exit sleep | | DISPON | 0x29 | Display on | | CASET | 0x2A | Column address set | | PASET | 0x2B | Page address set | | RAMWR | 0x2C | Write to GRAM |