Lava Benco V90 Ae9120 Flash File S160 Hang Logo New [new] May 2026

The Lava Benco V90 (AE9120 & S160) flash file is a critical software repair tool designed to resolve common system failures, most notably the "Hang on Logo" (bootloop) issue where the device fails to boot past the initial splash screen. Core Functionality & Effectiveness

Technicians from sites like Pure Flash File and Best Flash File review this firmware as a "100% tested" solution for several software-related problems:

Fixes Bootloops: Resolves the "Hang on Logo" and auto-restart problems by reinstalling the factory stock ROM.

Unbricking: Capable of recovering "dead" devices that resulted from failed root attempts or improper software updates.

Security Removal: Effectively removes FRP (Google Account) locks, patterns, and PIN codes without requiring expensive professional hardware boxes. Technical Specifications

Processor Support: Specifically designed for the Spreadtrum (SPD) chipset used in the Benco V90.

File Format: Uses the .PAC extension, which is the official format for Spreadtrum devices.

Required Tools: Must be flashed using the SPD Flash Tool (Research Tool) and requires the correct SPD USB drivers installed on a PC. Critical Considerations While generally safe, reviews highlight a few risks: lava benco v90 ae9120 flash file s160 hang logo new

Hardware Warning: If the phone hangs on the logo after a sudden shutdown or while charging, there is a 90% chance it is a hardware fault (e.g., EMMC or UFS IC failure) that flashing cannot fix.

Correct Versioning: Users must ensure they match the exact build version (AE9120/S160) to avoid "Dead after Flash" issues caused by using incompatible files.

Data Loss: Flashing this firmware will wipe all user data on the device. Benco V90 AE9120 Flash File All Update Download

4. Download the New Flash File: Lava Benco V90 AE9120 S160

Disclaimer: The following information is for educational purposes. Ensure you have the legal right to flash the device. We do not host direct copyrighted files but guide you to official or authorized sources.

File Name: Lava_Benco_V90_AE9120_S160_MTK_SP_Flash_Tool_File.zip (or similar based on chipset)

Key features of the "new" file (2024-2025 release):

Patched boot image to prevent logo hangs.
Updated preloader compatibility.
Verified scatter file for error-free flashing.

Where to find it (search terms for Google/Baidu): The Lava Benco V90 (AE9120 & S160) flash

Lava Benco V90 AE9120 S160 firmware free download
Benco V9000 S160 stock ROM
Lava AE9120 hang logo solution

File size: Approximately 1.5 GB to 2.2 GB (compressed).

Contents of the download:

scatter.txt (partition table)
preloader.bin
boot.img
recovery.img
system.img (sparse chunked or raw)
vendor.img
userdata.img
cache.img
MTK_AllInOne_DA.bin (Download Agent)

Step-by-Step Flashing Guide

Note: Flashing firmware carries a risk of voiding your warranty or damaging the device if done incorrectly. Proceed at your own risk.

Step 1: Extract the Files Download the Lava Benco V90 flash file and extract it using WinRAR or 7-Zip on your desktop. You should see the scatter file inside the folder.

Step 2: Launch SP Flash Tool Open the SP Flash Tool folder and run flash_tool.exe as Administrator.

Step 3: Load the Scatter File In the SP Flash Tool interface, click on the "Choose" or "Scatter-loading" button. Navigate to the folder where you extracted the firmware and select the scatter file.

Step 4: Configure for Hang Logo Fix For a Hang Logo issue, it is generally recommended to use the "Firmware Upgrade" or "Download Only" option. Patched boot image to prevent logo hangs

Download Only: Good for fixing the bootloop without wiping user data (sometimes).
Firmware Upgrade: Safer bet for stability, as it re-writes more partitions, but may wipe data.
Do NOT select "Format All + Download" unless you are sure, as this will wipe the NVRAM and cause IMEI loss.

Step 5: Connect the Device Turn off the Lava Benco V90 completely. In the SP Flash Tool, click the "Download" button. Now, connect the switched-off phone to the PC via USB.

Step 6: Flashing Process If the drivers are installed correctly, the tool should detect the phone, and a progress bar will appear. Wait for the process to reach 100%.

Step 7: Completion Once finished, you will see a green circle with a "Download Ok" message. Disconnect the phone, insert the battery (if removed), and power it on. The first boot may take 3-5 minutes as the system rebuilds the cache.

Phase 1: Preparation

Back up data (if possible – in a hang logo situation, likely not).
Charge the phone to at least 60% battery.
Install drivers: Download and install the correct USB VCOM driver for your chipset.
Extract the firmware using 7-Zip or WinRAR into a folder (e.g., C:\BencoV90_S160).
Launch SP Flash Tool as Administrator.

Understanding the Device and Firmware

The Lava Benco V90 is a budget-friendly smartphone that utilizes a specific hardware configuration. The mainboard ID for this device is typically AE9120. Like many Android devices in this segment, it runs on a MediaTek (MTK) chipset architecture, which dictates the flashing tools required.

The firmware version S160 is a specific iteration of the operating system designed for this hardware. Using the correct version is critical; flashing the wrong version (e.g., S120 or S140) on a device meant for S160 can lead to further complications, such as "Baseband Unknown" or IMEI loss.

Prerequisites for Flashing

Flashing firmware is a technical process. Ensure you have the following ready:

Windows PC: The flashing tools generally require a Windows operating system (Windows 7/8/10/11).
USB Data Cable: A quality cable ensures the connection doesn't drop during the process.
Device Drivers: You must install the specific MTK (MediaTek) USB VCOM or Preloader Drivers for the Lava Benco V90 so the computer can recognize the device.
Flash Tool: This device likely uses the SP Flash Tool (Smart Phone Flash Tool) or a proprietary factory tool.
Backup: If your device had important data, note that flashing the S160 firmware will likely wipe user data.

1. Required Flash File Details

Model: Lava Benco V90
Board/PCB: AE9120 (critical for correct firmware)
Status: S160 (likely the build number or software version)
Problem: Hangs on logo after flashing (new flash attempt)

You need the exact S160 version firmware for AE9120. Using S150, S170, or a different board version will cause bootloop/hang.